Problems with your machine in general.
- Trusted Guru
- Posts: 609
- Joined: Mon Aug 13, 2018 10:08 pm
- Location: The Netherlands
Thanks, it's good to know that's doable.PeteW wrote: ↑Sat Nov 24, 2018 9:21 pmI cut the connector in half along the original mold lines, dremelled out the inside (it's filled with rubber), glued it back together and soldered onto the original connectors.
There's some pics and more detail of what I did here:
Bye the way, I have seen two different types of connectors on the original ST mice, one shielded and the other not.