Damage done to my STE

Bikerbob · Post by **Bikerbob** » Thu Sep 19, 2019 8:55 pm

: jumpers2.jpg (122.5 KiB) Viewed 3630 times

Post by **exxos** » Thu Sep 19, 2019 9:15 pm

Bikerbob wrote: ↑Thu Sep 19, 2019 8:47 pm Sorry Chris, I dont understand just 2 pictures? So your saying there is only the one trace that goes to the Via to the other side.. thats it?

I highlighted the trace you was questioning... I think your not seeing exactly where the traces go and its resulting in the confusion.

Bikerbob · Post by **Bikerbob** » Thu Sep 19, 2019 9:52 pm

So then as I said.. just the one trace that goes to the via to the other side of the board to the ROM?

James

Post by **exxos** » Thu Sep 19, 2019 9:55 pm

Bikerbob wrote: ↑Thu Sep 19, 2019 9:52 pm So then as I said.. just the one trace that goes to the via to the other side of the board to the ROM?

I don't know which vias your referring to.. I highlighted the ones you mention anyway.. its better just to look at the images to see where things go.

Bikerbob · Post by **Bikerbob** » Thu Sep 19, 2019 10:09 pm

This is why sometimes this is better in PMs.. there seems to be a communication issue.. So layer 4 is the bottom? where I pulled the pad from?

SO I will need to jumper to make the trace you highlighted work.. correct?

James

Post by **exxos** » Thu Sep 19, 2019 10:11 pm

I think this one is your only issue you had....

https://www.exxosforum.co.uk/forum/viewt ... =30#p26304

Bikerbob · Post by **Bikerbob** » Fri Sep 20, 2019 6:36 am

Fixed! - fired up and working.

Have an HXC Gotek with it.. need to figureout how to setup the USB drive... off to the website!

James

Post by **derkom** » Fri Sep 20, 2019 7:27 am

Bikerbob wrote: ↑Thu Sep 19, 2019 6:21 pm Are you saying that if the TOS switcher is in.. and there is no floppy connected to the cable that there would be boot issues?? but not at the point I am at correct??

you would get a screen etc??

Because I dont have a floppy connected in testing this.

It's a TOS 2.06 misbehaviour issue that I knew eons ago, but had forgotten before installing the TOS switcher in the STe I picked up. Without a floppy connected, it'll do the RAM test, but then four bombs instead of move on to the desktop. Unrelated to the TOS switcher.

Post by **rubber_jonnie** » Fri Sep 20, 2019 9:02 am

Bikerbob wrote: ↑Fri Sep 20, 2019 6:36 am Fixed! - fired up and working.

Have an HXC Gotek with it.. need to figureout how to setup the USB drive... off to the website!

James

Try here as well for Gotek

https://www.exxosforum.co.uk/forum/viewt ... ilit=gotek

Bikerbob · Post by **Bikerbob** » Fri Sep 20, 2019 3:48 pm

rubber_jonnie wrote: ↑Fri Sep 20, 2019 9:02 am
Bikerbob wrote: ↑Fri Sep 20, 2019 6:36 am Fixed! - fired up and working.

Have an HXC Gotek with it.. need to figureout how to setup the USB drive... off to the website!

James
Try here as well for Gotek

https://www.exxosforum.co.uk/forum/viewt ... ilit=gotek

Thanks - yep I know FF.. this one has HXC on it.. so thought I would try it. Never played with it. I have played with FF for years though.. Keir has done some terrific stuff.

James

Damage done to my STE

Re: Damage done to my STE

Re: Damage done to my STE

Re: Damage done to my STE

Re: Damage done to my STE

Re: Damage done to my STE

Re: Damage done to my STE

Re: Damage done to my STE

Re: Damage done to my STE

Re: Damage done to my STE

Re: Damage done to my STE