Ok, so I should acquire some of the SRam but until then disable the SLC?
PAK issues
Re: PAK issues
If it ain't broke, test it to Destruction.
Re: PAK issues
Please change to the following jumper settings:
J9: 1-2 (set CPUCLK to 32MHz)
J10: 1-2 (set FPUCLK to 32MHz)
J4: on (disable the second level cache)
Keep everything else as is.. and switch on!
J9: 1-2 (set CPUCLK to 32MHz)
J10: 1-2 (set FPUCLK to 32MHz)
J4: on (disable the second level cache)
Keep everything else as is.. and switch on!
Re: PAK issues
The speed gain it's definitely worth!Forgottenmyname wrote: ↑Mon Jan 28, 2019 6:33 pm Ok, so I should acquire some of the SRam but until then disable the SLC?
Or the other way round: Sell your Tag-RAMs as well! I noticed there are people desperately looking for it..
Re: PAK issues
I will probably buy the SRam once I have the pak working.
I've set those jumper settings and get a 60hz grey screen, the same as you'd get if the Rom wasn't booting.
I've set those jumper settings and get a 60hz grey screen, the same as you'd get if the Rom wasn't booting.
If it ain't broke, test it to Destruction.
Re: PAK issues
Okay, next test:
- Assemble a 68000 on top of the PAK
- Remove J5 (disable the PAK, enable the 68000)
Switch on.
- Assemble a 68000 on top of the PAK
- Remove J5 (disable the PAK, enable the 68000)
Switch on.
Re: PAK issues
Next:
- Try 68000 only, without the PAK at all
- Try 68000 only, without the PAK at all
Re: PAK issues
One more test, if you don't mind:
- Remove GAL P3 from the PAK
- Set both J5 and J6 on
Switch on..
- Remove GAL P3 from the PAK
- Set both J5 and J6 on
Switch on..
Re: PAK issues
With the PAK assembled into the MegaST, of cause..