16 MHz 1.5V booster on STm

Problems with your machine in general.
Post Reply
nemox
Posts: 48
Joined: Sun Jan 27, 2019 7:37 pm

16 MHz 1.5V booster on STm

Post by nemox »

hi
I have 520STm with install "ATBUS TOS CARD" from HARD&SOFT(this is IDE card with TOS 2.06) and question is, how to create the CE pin for the booster 16Mhz V1.5


"Disconnect the CE wire to the TOS board and try again see if that helps..."

I do not have a booster card installed yet, and i do not have your TOS board.
My question is, how to create the CE pin on 520 STm with "ATBUS TOS CARD".

On the 520STm without ATBUS TOS CARD - I know how to create a CE point.(from HI ROM over diode..), but on the "ATBUS TOS CARD" is TOS 2.06 in two chips and i can switch between the TOS from motherboard and TOS from "ATBUS TOS CARD"

thanks
User avatar
exxos
Site Admin
Site Admin
Posts: 23506
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: 16 MHz 1.5V booster on STm

Post by exxos »

I don't know of that board, but it would have to have 120ns ROM speed or faster to work with the booster for starters.
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
Post Reply

Return to “HARDWARE ISSUES”