Help bringing my 1040STf back to life

Problems with your machine in general.
User avatar
exxos
Site Admin
Site Admin
Posts: 23488
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: Help bringing my 1040STf back to life

Post by exxos »

doc wrote: Tue Aug 27, 2019 4:46 pm Perhaps i'm wrong but the measures I get would say that there is no cut tracks on the board.
How do you know what is driving the bus, MMU ? CPU ? Buffers ? DRAM ? Even a cut track will still be driven by something. Even a floating signal can still give a voltage. So the tests are just not valid. Even with a scope its very hard to debug.

If the MMU can't get correct data back from the DRAM, it marks the bank as bad. Regardless of what you measure, how do you know what bits are faulty internally on the DRAM chips ?

doc wrote: Tue Aug 27, 2019 4:46 pm So in your opinion does it worth a try to your 4MB upgrade (STFM 4MB RAM EXPANSION) ...
Adding more potential issues onto a board which is already malfunctioning isn't a good idea.
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
User avatar
PaulJ
Posts: 1568
Joined: Sun Apr 08, 2018 1:14 am
Location: USA

Re: Help bringing my 1040STf back to life

Post by PaulJ »

Your meter cannot respond to the speed of signals on those lines not to mention they are not consistent signals and they will not appreciate the load the meter puts on them. Your efforts with a meter beyond power supply voltages and chip power are useless. If you want to check for opens power off the machine and verify resistances pin to pin via info you gleen from the schematic. :)
User avatar
PhilC
Moderator
Moderator
Posts: 6012
Joined: Fri Mar 23, 2018 8:22 pm

Re: Help bringing my 1040STf back to life

Post by PhilC »

Another suggestion, buy a working 1mb motherboard and use yours to learn electronics by fixing it at your leasure.
If it ain't broke, test it to Destruction.
doc
Posts: 39
Joined: Mon Aug 26, 2019 12:33 pm

Re: Help bringing my 1040STf back to life

Post by doc »

Ok thanks you all.
So I give up :(
User avatar
exxos
Site Admin
Site Admin
Posts: 23488
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: Help bringing my 1040STf back to life

Post by exxos »

Why didn't you consider what I suggested in my earlier post ? https://www.exxosforum.co.uk/forum/viewt ... 653#p25439
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
doc
Posts: 39
Joined: Mon Aug 26, 2019 12:33 pm

Re: Help bringing my 1040STf back to life

Post by doc »

Ok I'm gonna try to change the DRAM bank ... need now to find sockets and chips. Any advice where to buy them will be appreciated. Do you sell them ?
I'll keep you in touch for the results ...
User avatar
exxos
Site Admin
Site Admin
Posts: 23488
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: Help bringing my 1040STf back to life

Post by exxos »

doc wrote: Mon Sep 02, 2019 7:46 pm Ok I'm gonna try to change the DRAM bank ... need now to find sockets and chips. Any advice where to buy them will be appreciated. Do you sell them ?
I'll keep you in touch for the results ...
I do sell tested chips here https://www.exxosforum.co.uk/atari/store2/#0111 I don't sell sockets though, but I strongly recommend you use them, and even get a diagnostic cart. https://www.exxosforum.co.uk/atari/store2/#0165
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
doc
Posts: 39
Joined: Mon Aug 26, 2019 12:33 pm

Re: Help bringing my 1040STf back to life

Post by doc »

A bit funky to desolder the bank. I'm waiting to seek good soldering materials...
User avatar
exxos
Site Admin
Site Admin
Posts: 23488
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: Help bringing my 1040STf back to life

Post by exxos »

doc wrote: Wed Sep 11, 2019 12:37 pm A bit funky to desolder the bank. I'm waiting to seek good soldering materials...
Cut the pins of the chips, then you can desolder one pin at a time.
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
doc
Posts: 39
Joined: Mon Aug 26, 2019 12:33 pm

Re: Help bringing my 1040STf back to life

Post by doc »

Success !!!
Thank you evereyone for your replies and advices to my memory trouble. I finaly succeeded in changing the faulty DRAM bank thanks to Exxos ram set. It was rather difficult to unsold the chips. I used a desolder pumping station to archive that, but even with this efficient material it was hard to get the chips out of their holes (I destroyed one of them !). Yes i could have cut the pins and then desolder them out but I wanted to preserve the chips as much as possible in order to test them in case of success.

So I desolder the bank, soldered brand new sockets and plugged the new DRAM in. And voilà ! my 1Mo memory is back !!!
IMG_4234.jpg
IMG_4234.jpg (117.04 KiB) Viewed 3414 times
I then tested all the chips one by one, by replacing them one at a time into the new bank. Thanks to the diagnostic card I found only 2 of the chips (upon 16) where out of order.
IMG_4232.jpg
IMG_4232.jpg (210.27 KiB) Viewed 3414 times
Plus the one I destroyed...

Added a brand new 1.4 TOS.
IMG_4231.jpg
IMG_4231.jpg (147.34 KiB) Viewed 3414 times
And here is my baby ;)
IMG_3332.jpg
IMG_3332.jpg (131.31 KiB) Viewed 3414 times
Thanks again everybody !
Post Reply

Return to “HARDWARE ISSUES”