New User with a Falcon problem.
Re: New User with a Falcon problem.
I agree with Exxos. Firstly try and purchase the combel chip from best & then get it installed.
Re: New User with a Falcon problem.
BEST normally have them at $50 a pop.
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
Re: New User with a Falcon problem.
Apologies -- might be teaching granny to suck eggs -- but completely white display is what you see if the CPUBGI / CPUBGO jumper isn't in place on the smaller of the two expansion pin headers.
Before you start desoldering Combels, have you double (and triple!) checked the jumper's in the right place and making decent contact?
It should be, looking at the board from the keyboard side, on the farthest row of the smaller expansion header, bridging the fifth and sixth pin from the right.
Cheers,
BW.
DFB1 Open source 50MHz 030 and TT-RAM accelerator for the Falcon
DSTB1 Open source 16Mhz 68k and AltRAM accelerator for the ST
Smalliermouse ST-optimised USB mouse adapter based on SmallyMouse2
FrontBench The Frontier: Elite 2 intro as a benchmark
DSTB1 Open source 16Mhz 68k and AltRAM accelerator for the ST
Smalliermouse ST-optimised USB mouse adapter based on SmallyMouse2
FrontBench The Frontier: Elite 2 intro as a benchmark