Problems with your machine in general.
- Site Admin
- Posts: 2566
- Joined: Wed Aug 16, 2017 11:19 pm
- Location: UK
guus.assmann wrote: ↑
Wed Jan 03, 2018 9:23 pm
Have replaced the sockets, now two quality sockets with round contacts are in.
Still with these it doesn't work either.
However it was a very good idea.
Doesn't make much sense.
I would check the CE and OE pins on the ROM and make sure they are switching.. maybe broken trace/bad glue socket, from GLUE to ROM for chip enables, you changed the LS11 already.. but I think you should check the ROM select lines from GLUE to ROM sockets.
If TOS206 worked on another board, then onboard TOS104 isn't working, GLUE does decoding for that...
4MB STFM 1.44 FD- VELOCE+ 020 STE - 4MB STE 32MHz - STFM 16MHz - STM - MEGA ST - Falcon 030 CT60 - Atari 2600 - Atari 7800 - Gigafile - SD Floppy Emulator - PeST - HxC - CosmosEx - Ultrasatan - various clutter
All my hardware guides - mods - games - STOS
- All my hardware mods for sale - Please help support by making a purchase.
- Posts: 58
- Joined: Sat Sep 23, 2017 8:52 pm
- Location: Ede Netherlands
Finally, I found some courage and inpiration.
And solved the problem.
Jumper W2 had a bad contact.
But it was hidden below the body of the part.
So there was no or a bad connection from the decoding chip to the Eprom.
The board works fine again.