I think @DoG was referring to the SIL resistor network on the underside of the board where stween says:sporniket wrote: ↑Mon Apr 18, 2022 10:36 am If I understand things correctly, with the "1772 pull-up fix" and using a drive with internal pull-ups as well, the overall pull-up will be stronger -because one would ends up with 2 pull-ups in parallel for each line-.
@DoG , very likely a typo indeed, looking at the pictures I think the resistors on the pictures of the fix, I believe it is [grey/black/black/brown] i.e. 8K (because decoding in reverse direction would give [red/brown/black/black] i.e. 210.
"I've thrown in a 1k resistor network. I've done the same as far as I can tell from what I see in other photos."
This should be a 10K SIL and not 1K according to the mandatory fixes page.
@stween Can you confirm if the SIL resistor pack on the underside is 1K or 10K?