STE 32MHz PLUG IN BOOSTER (again) 2021 variation
Re: STE 32MHz PLUG IN BOOSTER (again) 2021 variation
For FDD most lines there are open collector with pull-ups, so adding capacitance parallel to the ground creates a nice low pass filter.
Re: STE 32MHz PLUG IN BOOSTER (again) 2021 variation
The capacitance on the overlap is likely going to be miniscule compared to the capacitance on the cable itself.
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
- HigashiJun
- Posts: 1195
- Joined: Fri Jun 19, 2020 7:21 am
- Location: Tokyo
Re: STE 32MHz PLUG IN BOOSTER (again) 2021 variation
Ok, the FD connector is finally repaired.
My SMD-300 seems to be dead (led does not light up and nothing happens...) so I have replaced it with my HXC floppy emulator.
Everything works great and without any glitches with Exxos beta booster.
I have no problems at all with my Ultrasatan nor my HXC.
I have played some games, launched some programs, made some transfers between the Ultrasatan and the HXC without any issues.
My GEMbench resusts are:
I also made a loop test for 1 hour and everything is normal.
So the booster works flawlessly on my STE and makes me totally happy !
Thanks again Exxos for this nice hardware you made. I hope you will go on with a full release.
Let's just hope that philbo34 will also have good news to share.
Cheers !
My SMD-300 seems to be dead (led does not light up and nothing happens...) so I have replaced it with my HXC floppy emulator.
Everything works great and without any glitches with Exxos beta booster.
I have no problems at all with my Ultrasatan nor my HXC.
I have played some games, launched some programs, made some transfers between the Ultrasatan and the HXC without any issues.
My GEMbench resusts are:
I also made a loop test for 1 hour and everything is normal.
So the booster works flawlessly on my STE and makes me totally happy !
Thanks again Exxos for this nice hardware you made. I hope you will go on with a full release.
Let's just hope that philbo34 will also have good news to share.
Cheers !
Re: STE 32MHz PLUG IN BOOSTER (again) 2021 variation
I'm still awaiting another ste motherboard mine died unplugging the ide card. Not had time to investigate further.
I think some of the socket pins not making contact as won't boot at mo , just black screen. There is a change to the pic pressing the reset button for a split second. Just can't get time off work at mo
I think some of the socket pins not making contact as won't boot at mo , just black screen. There is a change to the pic pressing the reset button for a split second. Just can't get time off work at mo
- HigashiJun
- Posts: 1195
- Joined: Fri Jun 19, 2020 7:21 am
- Location: Tokyo
Re: STE 32MHz PLUG IN BOOSTER (again) 2021 variation
It would be great to know if your IDE card works with Exxos' booster once you get your new motherboard...philbo34 wrote: ↑Thu Mar 11, 2021 12:59 pm I'm still awaiting another ste motherboard mine died unplugging the ide card. Not had time to investigate further.
I think some of the socket pins not making contact as won't boot at mo , just black screen. There is a change to the pic pressing the reset button for a split second. Just can't get time off work at mo
Anyway, keep us informed.
Re: STE 32MHz PLUG IN BOOSTER (again) 2021 variation
I've been watching this one with much interest!HigashiJun wrote: ↑Thu Mar 11, 2021 8:07 am So the booster works flawlessly on my STE and makes me totally happy !
Good work, Exxos.
BW.
DFB1 Open source 50MHz 030 and TT-RAM accelerator for the Falcon
DSTB1 Open source 16Mhz 68k and AltRAM accelerator for the ST
Smalliermouse ST-optimised USB mouse adapter based on SmallyMouse2
FrontBench The Frontier: Elite 2 intro as a benchmark
DSTB1 Open source 16Mhz 68k and AltRAM accelerator for the ST
Smalliermouse ST-optimised USB mouse adapter based on SmallyMouse2
FrontBench The Frontier: Elite 2 intro as a benchmark
Re: STE 32MHz PLUG IN BOOSTER (again) 2021 variation
Finally got a few built and being tested currently.. Hopefully they will be in my store in the near future. I am not planning on building up many of these because boosters are just not popular enough and finding GALs which actually work is getting harder as time goes on..
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
Re: STE 32MHz PLUG IN BOOSTER (again) 2021 variation
Wondered if these could make use of fast-ram or at least alt-ram? Though that's adding in a whole load of extra complications unfortunately.
Re: STE 32MHz PLUG IN BOOSTER (again) 2021 variation
They could be made to work with fast ram. But there's no interest in the STFM versions and 5V SRAM totals £100 in just the RAM alone. Would take a lot of time and be expensive. Nobody would buy it.
I did a TF536 adapter for the STE but there's just not enough interest in the ST to really warrant doing much with boosters anymore. It's why I haven't really bothered much with the SEC booster for a long time.
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
Re: STE 32MHz PLUG IN BOOSTER (again) 2021 variation
I know I'd like some sort of booster, would prefer it to be for my STe as I'd like to be able to use DMA sound and MiNT. Though MINT isn't great with only 4Mb to use. Guess I could hope for the STe TF adapter?