ABOUT THE STE V1 BOOSTER

Help & information about the STE V1 booster.
Locked
User avatar
exxos
Site Admin
Posts: 2211
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

ABOUT THE STE V1 BOOSTER

Post by exxos » Fri Aug 18, 2017 6:53 pm

Image

Image

The STE 32MHz Booster is comprised of 2 parts. The CPU booster itself and the Fast ROM board which replaces the older slower TOS ROM's.

Results above are the STE running GB6 at 32MHz CPU & ROM. This gives a huge boost in ROM/GEM speeds and also huge boost in Integer Division. This booster can be switched back to 8MHz by linking the SW wire to GND. When the wire is left disconnected the 32MHz boost is active and is its default operating mode.

This kit requires the CPU socket to be removed and the booster installed in its place.

STE V1 HOME
http://www.exxoshost.co.uk/atari/last/V1STE/index.htm

STORE LINK
https://www.exxoshost.co.uk/atari/last/storenew/#0059

If you are looking for help with this booster, please open up a new topic in this section.
4MB STFM 1.44 FD- VELOCE+ 020 STE - 4MB STE 32MHz - STFM 16MHz - STM - MEGA ST - Falcon 030 CT60 - Atari 2600 - Atari 7800 - Gigafile - SD Floppy Emulator - PeST - HxC - CosmosEx - Ultrasatan - various clutter

https://www.exxoshost.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxoshost.co.uk/atari/last/storenew/ - All my hardware mods for sale - Please help support by making a purchase.

Locked