STE V1.5 32MHz BOOSTER - STATUS

Help & information about the STE V1 series boosters.
Locked
User avatar
PhilC
Moderator
Moderator
Posts: 6017
Joined: Fri Mar 23, 2018 8:22 pm

Re: STE V1.5 32MHz BOOSTER - STATUS

Post by PhilC »

Maybe its the lead free solder and modern flux? Mine used to never wear out either. I've even got some old Antex yellow irons from years ago, still useable if ever needed.
If it ain't broke, test it to Destruction.
User avatar
exxos
Site Admin
Site Admin
Posts: 23506
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: STE V1.5 32MHz BOOSTER - STATUS

Post by exxos »

Forgottenmyname wrote: Tue Nov 20, 2018 4:54 pm Maybe its the lead free solder and modern flux? Mine used to never wear out either. I've even got some old Antex yellow irons from years ago, still useable if ever needed.
I don't use lead free..
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
User avatar
sandord
Posts: 673
Joined: Mon Aug 13, 2018 10:08 pm
Location: The Netherlands
Contact:

Re: STE V1.5 32MHz BOOSTER - STATUS

Post by sandord »

exxos wrote: Tue Nov 20, 2018 5:05 pm
Forgottenmyname wrote: Tue Nov 20, 2018 4:54 pm Maybe its the lead free solder and modern flux? Mine used to never wear out either. I've even got some old Antex yellow irons from years ago, still useable if ever needed.
I don't use lead free..
There's a thin layer of silver on the tip (perhaps really cheap ones use something else) and if it burns off, you're done.
User avatar
exxos
Site Admin
Site Admin
Posts: 23506
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: STE V1.5 32MHz BOOSTER - STATUS

Post by exxos »

sandord wrote: Tue Nov 20, 2018 5:07 pm There's a thin layer of silver on the tip (perhaps really cheap ones use something else) and if it burns off, you're done.
I think I read Weller tips have something "stronger" than most...

Changed the tip..

Look at the old one! its gone right deformed!!

tip.jpg
tip.jpg (214.87 KiB) Viewed 3478 times
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
User avatar
exxos
Site Admin
Site Admin
Posts: 23506
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: STE V1.5 32MHz BOOSTER - STATUS

Post by exxos »

So another pass and another fail on the red boards.. :roll: Out of red boards now! Considering there was 14 originally I have only four at the moment which can go into stock.. Basically no more boards after these for a while..

Trying to quickly build up one of these tweaked boards tonight...

Of course I need to build up all 10 of these to see if they are more reliable for assembly than the red PCBs.

Part of the assembly problem is the copper flood fill on the header pins, its taking a lot of heat to solder and the solder is not sticking to the pads to some reason. I think the assembly place must have cleaned these boards with something which has caused some slight corrosion preventing the solder from re-flowing properly.. :roll:

Annoyingly this means I will have to assemble all these things myself, which I really do not want to do... But if these new boards assemble better, then I may do a small batch of probably 10 and that will be it for a while. The only other option is to supply these as kits, but knowing how to the nightmare these are two get working, I really don't think that is a good idea, but considering the disaster the previous boosters were with people trying to assemble them themselves. This one is even harder!

gb.jpg
gb.jpg (115.71 KiB) Viewed 3453 times
p1.jpg
p1.jpg (157.76 KiB) Viewed 3453 times

EDIT:

Out of the oven...

p2.jpg
p2.jpg (200.47 KiB) Viewed 3450 times
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
User avatar
PhilC
Moderator
Moderator
Posts: 6017
Joined: Fri Mar 23, 2018 8:22 pm

Re: STE V1.5 32MHz BOOSTER - STATUS

Post by PhilC »

Looking good. Hope you're luckier with these boards
If it ain't broke, test it to Destruction.
User avatar
exxos
Site Admin
Site Admin
Posts: 23506
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: STE V1.5 32MHz BOOSTER - STATUS

Post by exxos »

https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
User avatar
exxos
Site Admin
Site Admin
Posts: 23506
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: STE V1.5 32MHz BOOSTER - STATUS

Post by exxos »

So built it up.. didn't work.. was about to throw it out of the window, then saw a tiny short between the CPU pins, gnats knacker sized.. removed it, and now its running away!

One thing I have noticed (oddly) is these boosters seem to be running fine with 10K on my motherboard alone.. so possible I may not fit the SIL's on later boards... Need to do more testing first though..

IMG_3579.JPG
IMG_3579.JPG (265.8 KiB) Viewed 3857 times

EDIT:

Trying 40MHz on this board.. I forgot to mention I got a new batch of CPU's. This one "so far" is running at 40MHz with waitstates on ROM. I have heated it up to "ow ya'feker hot" and its still going... CPU's crashed easily with a little heat on previous tests.. so MIGHT be possible some of these CPU's will run at 40MHz... time will tell...

EDIT2:

Spoke to soon it seems :roll:
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
User avatar
PhilC
Moderator
Moderator
Posts: 6017
Joined: Fri Mar 23, 2018 8:22 pm

Re: STE V1.5 32MHz BOOSTER - STATUS

Post by PhilC »

How far did this one get? any more reliable than the red ones?
If it ain't broke, test it to Destruction.
User avatar
exxos
Site Admin
Site Admin
Posts: 23506
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: STE V1.5 32MHz BOOSTER - STATUS

Post by exxos »

Forgottenmyname wrote: Wed Nov 21, 2018 7:46 pm How far did this one get? any more reliable than the red ones?
Been out all day.. only just got home. I had to turn it off last night but seems fine at 36MHz. 40MHz was still a no go with these CPUs.
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
Locked

Return to “STE V1 SERIES 32MHz BOOSTER”