Page 1 of 1

Falcon VGA 3-in-1 monitor adapter by dhedberg

Posted: Fri Feb 22, 2019 4:32 pm
by exxos
fa.jpg
fa.jpg (62.15 KiB) Viewed 540 times

This adapter plugs into the monitor port and makes it possible to connect monitors using a standard VGA cable.
It also features a switch for changing between RGB and VGA video modes, allowing users with multi-sync monitors to take advantage of all video modes of the Falcon030. Finally, the adapter provides a higher frequency pixel clock signal to the Falcon030 video chip, making it possible to achieve higher screen resolutions. The adapter is compatible with the Blow-Up software and Videlity software (used to configure the enhanced video modes).

More information here:
3-IN-1.PDF
(805.16 KiB) Downloaded 43 times

The Blow-Up software has been released by its author and can be copied freely.
Please read the READ-ME.TXT file included in the BLOWUP.ZIP archive for further instructions and a few example configurations (these require the 3-in-1 monitor adapter).

Software:
BLOWUP.ZIP
(289.65 KiB) Downloaded 35 times

Manual (German, original):
BLOWUP.PDF
(7.14 MiB) Downloaded 31 times

Manual (English, kindly provided by Saturnin51):
BLOWUP_E.PDF
(1.59 MiB) Downloaded 40 times

Store link:
https://www.exxoshost.co.uk/atari/last/storenew/#0146