External SF314 power supply replacement

General discussions or ideas about hardware.
User avatar
sandord
Trusted Guru
Trusted Guru
Posts: 594
Joined: Mon Aug 13, 2018 10:08 pm
Location: The Netherlands
Contact:

Re: External SF314 power supply replacement

Post by sandord » Sun Sep 02, 2018 3:20 pm

4.jpg
4.jpg (102.65 KiB) Viewed 792 times

User avatar
sandord
Trusted Guru
Trusted Guru
Posts: 594
Joined: Mon Aug 13, 2018 10:08 pm
Location: The Netherlands
Contact:

Re: External SF314 power supply replacement

Post by sandord » Sun Sep 02, 2018 3:21 pm

Next time, I'll design it to have the typical ST grille :)

poobah
Posts: 13
Joined: Fri Feb 02, 2018 8:44 pm

Re: External SF314 power supply replacement

Post by poobah » Sun Sep 02, 2018 3:31 pm

Looks nice!
Do need some heat shrink on the terminals inside tho.

User avatar
PhilC
Moderator
Moderator
Posts: 2046
Joined: Fri Mar 23, 2018 8:22 pm

Re: External SF314 power supply replacement

Post by PhilC » Sun Sep 02, 2018 3:41 pm

Looks good to me :-)
If it ain't broke, test it to Destruction.

User avatar
sandord
Trusted Guru
Trusted Guru
Posts: 594
Joined: Mon Aug 13, 2018 10:08 pm
Location: The Netherlands
Contact:

Re: External SF314 power supply replacement

Post by sandord » Sun Sep 02, 2018 3:41 pm

poobah wrote:
Sun Sep 02, 2018 3:31 pm
Looks nice!
Do need some heat shrink on the terminals inside tho.
Yeah, shrink would definitely be better. I should've made the box a little bit longer for that to be practical.

What you can't see is that I put some glue blobs on both sides of the pcb to keep it in place.
So I'm not worried that it'll start moving and make short with the terminals.

poobah
Posts: 13
Joined: Fri Feb 02, 2018 8:44 pm

Re: External SF314 power supply replacement

Post by poobah » Sun Sep 02, 2018 3:44 pm

sandord wrote:
Sun Sep 02, 2018 3:41 pm
poobah wrote:
Sun Sep 02, 2018 3:31 pm
Looks nice!
Do need some heat shrink on the terminals inside tho.
Yeah, shrink would definitely be better. I should've made the box a little bit longer for that to be practical.

What you can't see is that I put some glue blobs on both sides of the pcb to keep it in place.
So I'm not worried that it'll start moving and make short with the terminals.
Yah... The Mrs. is a glue gun maestro.....

Post Reply

Return to “HARDWARE DISCUSSIONS”