16BIT ROM CART THOUGHTS

https://www.youtube.com/user/exxosuk · Post by **exxos** » Mon Mar 25, 2019 1:51 pm

A month later... I actually soldered one up!

Next to work on the ROM...

: cart8.jpg (82.69 KiB) Viewed 2025 times

https://www.youtube.com/user/exxosuk · Post by **exxos** » Mon Mar 25, 2019 2:30 pm

Sweeeeeeeeeet!

: IMG_3906.JPG (60.65 KiB) Viewed 2022 times

: IMG_3907.JPG (74.37 KiB) Viewed 2022 times

Not sure why they showing up on D:

But thanks to Atarian Computing for that bit of black magic voodoo!

I'm not having much luck with YAART though

EDIT:

OK I ballsed up one of the jumper links locations on the PCB.. I put a selection jumper on the ST side on A15 not the ROM side

Onto V9 then...

https://www.youtube.com/user/exxosuk · Post by **exxos** » Mon Mar 25, 2019 4:00 pm

V9 done.

I've moved the "6" in "GEMBENCH 6" closer as it looked like "60" because of the jumper hole

and now looking at the image it seems to have moved to somewhere I didn't put it

Fixed the jumper link fekup.

Also changed the cap from 5mm to 2.5mm as 5mm caps in the size I want seem hard to find

But more choice in 2.5mm.. Anyway, its swapped now.

So they now in the basket awaiting for me to punch send on the current pcb orders...

: b47580d5b2e1dadf73617f4b7dd0b542.png (38.75 KiB) Viewed 2009 times

https://www.youtube.com/user/exxosuk · Post by **exxos** » Wed Apr 10, 2019 1:50 pm

V9 Built and tested fine finally!

Will start collecting parts to build up a batch of these to add to my store over the next couple of weeks or so...

: dc9.jpg (155.24 KiB) Viewed 1932 times

Bikerbob · Post by **Bikerbob** » Wed Apr 10, 2019 3:13 pm

Very Nice Exxos.. any idea on pricing yet?

I might have missed it if it was early in the thread.

James

https://www.youtube.com/user/exxosuk · Post by **exxos** » Wed Apr 10, 2019 3:17 pm

Bikerbob wrote: ↑
Wed Apr 10, 2019 3:13 pm
Very Nice Exxos.. any idea on pricing yet?

I might have missed it if it was early in the thread.

James

No price worked out yet. I need to see how much they will cost to assemble first. Maybe around 25 at a guess.

https://www.youtube.com/user/exxosuk · Post by **exxos** » Mon Apr 22, 2019 3:53 pm

Started making up a few more... 2 are spoken for, one which will go off to the assembly place for them to copy at some point, and the fourth in case one doesn't work

I'm sure the rework station isn't supposed to be used in this way.. #dontcare

: IMG_4068.JPG (142.2 KiB) Viewed 1813 times

https://www.youtube.com/user/exxosuk · Post by **exxos** » Tue Apr 23, 2019 3:14 pm

Resolution was not as good as I hoped... But it has been stickered nonetheless!

: 11.jpg (75.87 KiB) Viewed 1795 times

The actually look a lot better on the actual cartridge...

: 1.jpg (93.84 KiB) Viewed 1795 times

DoG · Post by **DoG** » Tue Apr 23, 2019 3:34 pm

Ooo. Fancy. I like it!

Atarian Computing · Post by **Atarian Computing** » Tue Apr 23, 2019 4:27 pm

Make sure your image is 300dpi if you're printing stickers.

16BIT ROM CART THOUGHTS

Re: 16BIT ROM CART THOUGHTS

Re: 16BIT ROM CART THOUGHTS

Re: 16BIT ROM CART THOUGHTS

Re: 16BIT ROM CART THOUGHTS

Re: 16BIT ROM CART THOUGHTS

Re: 16BIT ROM CART THOUGHTS

Re: 16BIT ROM CART THOUGHTS

Re: 16BIT ROM CART THOUGHTS

Re: 16BIT ROM CART THOUGHTS

Re: 16BIT ROM CART THOUGHTS