STE mods

General discussions or ideas about hardware.
User avatar
HigashiJun
Posts: 1195
Joined: Fri Jun 19, 2020 7:21 am
Location: Tokyo

Re: STE mods

Post by HigashiJun »

I have just reverted to my original configuration and everything works again... :D

So the memory is not the culprit and works just fine without parity chips.

I am pretty sure the booster would work with the bent pins method IngoQ did, but I think there is something wrong with the alternative method (cut trace and 2 solder spots) IngoQ further discovered.

If one of you guys have some clues or ideas, please share.

But meanwhile, let's wait for Exxos new plug-in booster ;)

Cheers.
User avatar
HigashiJun
Posts: 1195
Joined: Fri Jun 19, 2020 7:21 am
Location: Tokyo

Re: STE mods

Post by HigashiJun »

Some feedback here on my last attempts to make the booster work (before testing Exxos' new beta booster).

After checking connections, I noticed a wire was de-soldered. My previous issues were surely related to this, as once the wire securely soldered again, my STE starts with no problems. :oops:

Salvatore.gif
Salvatore.gif (1.45 MiB) Viewed 2580 times

But:

- my Ultrasatan powers-on without booting from SD card (even in 8 Mhz mode)
- the FDD does not work with booster at 32Mhz (=Your Output Device is not receiving Data)
- the FDD works flawlessly with booster switched back to 8 Mhz

Could these problems be related to the resistor on the booster ? I swapped the original one for a 68R as suggested by Exxos.

Any comments are welcome.

Cheers.
User avatar
HigashiJun
Posts: 1195
Joined: Fri Jun 19, 2020 7:21 am
Location: Tokyo

Re: STE mods

Post by HigashiJun »

Soldered back the original resistor (470R) on the booster but my STE does not boot...
User avatar
exxos
Site Admin
Site Admin
Posts: 23493
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: STE mods

Post by exxos »

You not got one of these by any chance ?

https://www.exxosforum.co.uk/forum/viewt ... 685#p57665

Also what resistor are you referring to ?

Do you man these mods ? https://www.exxosforum.co.uk/forum/viewt ... =20#p41514

Also note the capacitor ...
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
User avatar
HigashiJun
Posts: 1195
Joined: Fri Jun 19, 2020 7:21 am
Location: Tokyo

Re: STE mods

Post by HigashiJun »

Ok, all the wires connecting to the booster are completely removed.

The cut trace is now functional again and everything is (almost) ready to test the new beta plug-in booster.

I guess the value of the resistor is somehow related to the FDD and Ultrasatan issues.

IngoQ seems to have the same mainboard revision as mine and he did not experienced any problems...

I think previous booster batches had a different resistor than 470R.
User avatar
HigashiJun
Posts: 1195
Joined: Fri Jun 19, 2020 7:21 am
Location: Tokyo

Re: STE mods

Post by HigashiJun »

exxos wrote: Sat Feb 13, 2021 9:10 am You not got one of these by any chance ?

https://www.exxosforum.co.uk/forum/viewt ... 685#p57665

Also what resistor are you referring to ?

Do you man these mods ? https://www.exxosforum.co.uk/forum/viewt ... =20#p41514
No, I have the Lotharek version:

Ultrasatan.jpeg
Ultrasatan.jpeg (337.95 KiB) Viewed 2552 times

Yes, I meant that mods.

The capacitor was also removed when I swapped the resistor.
User avatar
exxos
Site Admin
Site Admin
Posts: 23493
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: STE mods

Post by exxos »

HigashiJun wrote: Sat Feb 13, 2021 9:27 am The capacitor was also removed when I swapped the resistor.
Have you tried with no resistor or capacitor ?
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
User avatar
HigashiJun
Posts: 1195
Joined: Fri Jun 19, 2020 7:21 am
Location: Tokyo

Re: STE mods

Post by HigashiJun »

exxos wrote: Sat Feb 13, 2021 9:28 am
HigashiJun wrote: Sat Feb 13, 2021 9:27 am The capacitor was also removed when I swapped the resistor.
Have you tried with no resistor or capacitor ?
No, I did not.

Too late now as everything went back to its quite original state...

But anyway I am happy the booster worked somehow.

And it would surely have worked without any glitch if I could spend more time on it, but I prefer concentrate on your beta version which is more aesthetical...
Post Reply

Return to “HARDWARE DISCUSSIONS”