As promised in another thread, here are some pics of the internal mods I made in my 1040 STE during my short summer vacation:
Everything works like a charm.
Next step will be to install the STE booster, but it's another story...
Cheers.
STE mods
Re: STE mods
Looks great ! Could you give more detail on the internal satan Install please?
- HigashiJun
- Posts: 1215
- Joined: Fri Jun 19, 2020 7:21 am
- Location: Tokyo
Re: STE mods
Thanks !
Here's a picture from another forum which will help you connect the Ultra Satan internally:
If you plan to install Exxos' HD fdd kit, you'll have to move the flat cable on the left side, as seen in my previous pics.
Have fun !
- HigashiJun
- Posts: 1215
- Joined: Fri Jun 19, 2020 7:21 am
- Location: Tokyo
Re: STE mods
Next steps done...
CPU is now socketed
and tested... Everything works fine.
Exxos booster is stripped off and ready for a fit:
But I'll have to replace the SIL resistors on the STE board first.
Need to find more free time to get the job done.
CPU is now socketed
and tested... Everything works fine.
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
Exxos booster is stripped off and ready for a fit:
But I'll have to replace the SIL resistors on the STE board first.
Need to find more free time to get the job done.
Re: STE mods
The booster won't fit on motherboards where the cpu is/was soldered to the motherboard..
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
- HigashiJun
- Posts: 1215
- Joined: Fri Jun 19, 2020 7:21 am
- Location: Tokyo
Re: STE mods
Yes, I know that soldered CPUs were not compatible with your booster.
I just plan to mod my STE as IngoQ did and that's why I had to strip your booster off.
I just plan to mod my STE as IngoQ did and that's why I had to strip your booster off.
Re: STE mods
It is not recommend or approved a reliable method of installing the booster. Just because ingo got it working doesn't mean its reliable or will work on any other machines.
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
- HigashiJun
- Posts: 1215
- Joined: Fri Jun 19, 2020 7:21 am
- Location: Tokyo
Re: STE mods
No problem if it doesn't work, I won't blame you...
Re: STE mods
I ended up keeping the 1.5 STF-Booster in my STE, since it had such a nice small footprint. But the STE booster worked very well too.
Ingo
| Atari 1040STE@32MHz | Amiga 1200 (ACA1220) | Atari 800XL (U1MB, SIDE2) | Atari 130XL (Sophia DVI) | C64 (1541 Ultimate II, Rev3 RFMod Replacement) | TI 99/4A (F18A, 32k, FlashROM 99) | Sinclair ZX Spectrum 128 (Stereo, DivMMC) | Amstrad CPC664 (512k, M4 Wifi) | ... |
![Geek :geek:](./images/smilies/icon_e_geek.gif)
| Atari 1040STE@32MHz | Amiga 1200 (ACA1220) | Atari 800XL (U1MB, SIDE2) | Atari 130XL (Sophia DVI) | C64 (1541 Ultimate II, Rev3 RFMod Replacement) | TI 99/4A (F18A, 32k, FlashROM 99) | Sinclair ZX Spectrum 128 (Stereo, DivMMC) | Amstrad CPC664 (512k, M4 Wifi) | ... |
- HigashiJun
- Posts: 1215
- Joined: Fri Jun 19, 2020 7:21 am
- Location: Tokyo
Re: STE mods
Sure it has, but as Exxos doesn't sell it anymore, the only way for me was the STE booster.
Anyway, I'd like to thank you for your great post. It saves me from doing all the research you did (connections, traces, etc.).
![Cool 8-)](./images/smilies/icon_cool.gif)
Cheers.