Mega ST project
- HigashiJun
- Posts: 1212
- Joined: Fri Jun 19, 2020 7:21 am
- Location: Tokyo
Re: Mega ST project
I don't think so...
I have this programme and it sets stuff for Idek's drivers, but it doesn't work with NVDI.
I have this programme and it sets stuff for Idek's drivers, but it doesn't work with NVDI.
- frank.lukas
- Posts: 661
- Joined: Fri Jan 19, 2018 11:52 am
Re: Mega ST project
NVDI VMG is in the Folder C:\NVDITOOL.S\
- HigashiJun
- Posts: 1212
- Joined: Fri Jun 19, 2020 7:21 am
- Location: Tokyo
Re: Mega ST project
That is weird...
May I have missed it ?
That is where I was looking for it.
I will reinstall NVDI and check again.
Thank you Frank.
- HigashiJun
- Posts: 1212
- Joined: Fri Jun 19, 2020 7:21 am
- Location: Tokyo
Re: Mega ST project
Ok, finally got it...
I had to install ET4000 and not NOVA.
Now, have to check how it works.
I had to install ET4000 and not NOVA.
Now, have to check how it works.
- frank.lukas
- Posts: 661
- Joined: Fri Jan 19, 2018 11:52 am
Re: Mega ST project
I test it and this nvdivga.inf works with my STGA adapter in a Atari Mega ST. I have a card with AT&T 24bit DAC. Not all cards work with NVDI ...
- HigashiJun
- Posts: 1212
- Joined: Fri Jun 19, 2020 7:21 am
- Location: Tokyo
Re: Mega ST project
I have also a 24-bit DAC.frank.lukas wrote: ↑Mon Oct 25, 2021 12:51 pm I test it and this nvdivga.inf works with my STGA adapter in a Atari Mega ST. I have a card with AT&T 24bit DAC. Not all cards work with NVDI ...
NVDIVGA.INF.zip
I will test your NVDIVGA.INF with my configuration.
Cheers.
- frank.lukas
- Posts: 661
- Joined: Fri Jan 19, 2018 11:52 am
Re: Mega ST project
Display with the Nova Driver is 110% ...
- HigashiJun
- Posts: 1212
- Joined: Fri Jun 19, 2020 7:21 am
- Location: Tokyo
Re: Mega ST project
Ok, made some progress with NVDi but some issues are not yet solved.
Should have some free time soon to experiment a bit more.
You have pretty good results with your Nova drivers Frank.
Should have some free time soon to experiment a bit more.
You have pretty good results with your Nova drivers Frank.
- HigashiJun
- Posts: 1212
- Joined: Fri Jun 19, 2020 7:21 am
- Location: Tokyo
Re: Mega ST project
Ok, so the NVDI 5.03 ET4000 driver works with my STGA setup.
I personally prefer Idek's drivers, which are install friendly compared to the clumsy NVDI.
Results are slightly better, but blitter is disabled by default and there is no way to turn it on.
I personally prefer Idek's drivers, which are install friendly compared to the clumsy NVDI.
Results are slightly better, but blitter is disabled by default and there is no way to turn it on.