Mega ST project
- frank.lukas
- Posts: 664
- Joined: Fri Jan 19, 2018 11:52 am
Re: Mega ST project
contact the seller and ask ...
- HigashiJun
- Posts: 1215
- Joined: Fri Jun 19, 2020 7:21 am
- Location: Tokyo
Re: Mega ST project
Still waiting for a reply from the seller...
- HigashiJun
- Posts: 1215
- Joined: Fri Jun 19, 2020 7:21 am
- Location: Tokyo
Re: Mega ST project
I was just trying to make the PAK/68 work today (without really thinking of any kind of achievement), and...
A big success (even if GAL V5_51A is not U3 but U5...) !
Clock is 32 Mhz and there were no freezes until now.
My actual setup is: blitter removed, 2.2K pull-ups and original line drivers, i.e. 74LS244 and 74LS373.
I am still waiting for the "F" line drivers to be delivered, but if everything works great, I am not sure whether to replace them.
I will also have to connect the FDD to check there are no issues while accessing floppies.
A big success (even if GAL V5_51A is not U3 but U5...) !
Clock is 32 Mhz and there were no freezes until now.
My actual setup is: blitter removed, 2.2K pull-ups and original line drivers, i.e. 74LS244 and 74LS373.
I am still waiting for the "F" line drivers to be delivered, but if everything works great, I am not sure whether to replace them.
I will also have to connect the FDD to check there are no issues while accessing floppies.
- HigashiJun
- Posts: 1215
- Joined: Fri Jun 19, 2020 7:21 am
- Location: Tokyo
Re: Mega ST project
EDIT: Replaced the oscillator with a 50 Mhz one and still no issues.
Re: Mega ST project
Nice!
Welcome To DarkForce! www.darkforce.org "The Fuji Lives.!"
Atari SW/HW based BBS-Telnet:darkforce-bbs.dyndns.org 1040
Atari SW/HW based BBS-Telnet:darkforce-bbs.dyndns.org 1040
- frank.lukas
- Posts: 664
- Joined: Fri Jan 19, 2018 11:52 am
- HigashiJun
- Posts: 1215
- Joined: Fri Jun 19, 2020 7:21 am
- Location: Tokyo
Re: Mega ST project
The hard work seems to be done...
BTW, nice setup Frank.
BTW, nice setup Frank.
- HigashiJun
- Posts: 1215
- Joined: Fri Jun 19, 2020 7:21 am
- Location: Tokyo
Re: Mega ST project
I was just fiddling with my setup, trying to find the best position for each of the expansions I want to install when a bloody short destroyed my Lightning ST...
One GAL on the PAK68 was also dead, but as I have some spare ones, I was just a matter of time to burn a new one.
Other stuff is also working, so only the Lightning ST is unusable.
I hope the Thunder & Storm & Lightning team is still selling some, but I have no reply from Matthias when I send a mail.
One GAL on the PAK68 was also dead, but as I have some spare ones, I was just a matter of time to burn a new one.
Other stuff is also working, so only the Lightning ST is unusable.
I hope the Thunder & Storm & Lightning team is still selling some, but I have no reply from Matthias when I send a mail.
Re: Mega ST project
@HigashiJun Matthias who does the emails has been really unresponsive for a while now, but I know he's had some difficult times recently (he told me in an email) You might be better off speaking to @czietz as he seems to be 'picking up the slack' a lot I noticed on Atari forum, although he is a developer he seems to be most of the customer interaction lately, poor guy
- HigashiJun
- Posts: 1215
- Joined: Fri Jun 19, 2020 7:21 am
- Location: Tokyo
Re: Mega ST project
Hello Steve,Steve wrote: ↑Sat Nov 13, 2021 10:24 am @HigashiJun Matthias who does the emails has been really unresponsive for a while now, but I know he's had some difficult times recently (he told me in an email) You might be better off speaking to @czietz as he seems to be 'picking up the slack' a lot I noticed on Atari forum, although he is a developer he seems to be most of the customer interaction lately, poor guy
Thank you for your post.
I know Matthias had some hard times, but as I got a reply from him after, I thought everything was back to normal.
I am really sorry for him if he still has tough events to deal with.
I will reply to czietz personal PM.
Cheers.