Nothing works so give up the device is faulty and not functional. I can not work with linux because my pc is a 32bit one and to old so I can not install xc3sprog.
Xilinx programming cable USB -- anyone got this one?
- frank.lukas
- Posts: 661
- Joined: Fri Jan 19, 2018 11:52 am
- frank.lukas
- Posts: 661
- Joined: Fri Jan 19, 2018 11:52 am
Re: Xilinx programming cable USB -- anyone got this one?
i wish someone would flash it for me. This modern witchcraft is not my thing. DIL components and GALs are the highest for me ...
Re: Xilinx programming cable USB -- anyone got this one?
Are you not friendly with Tuxie/Ingo or Matthias? I am sure they would help you out (in the same country for ease of postage)frank.lukas wrote: ↑Tue May 17, 2022 5:53 pm i wish someone would flash it for me. This modern witchcraft is not my thing. DIL components and GALs are the highest for me ...
- frank.lukas
- Posts: 661
- Joined: Fri Jan 19, 2018 11:52 am
Re: Xilinx programming cable USB -- anyone got this one?
My DFB1 works but without the use of Fastram. YAART reports a lot of errors so my Fastram do not work. I have no trust in Tuxie so may be Matthias can I ask ...
Re: Xilinx programming cable USB -- anyone got this one?
I though you wanted to try your FT232H-based cable, too?
- frank.lukas
- Posts: 661
- Joined: Fri Jan 19, 2018 11:52 am
Re: Xilinx programming cable USB -- anyone got this one?
That wouldn't really help. We don't yet know what the issue is. I haven't reworked the firmware to the same standard as DSTB1 yet either so we'd need to iterate.frank.lukas wrote: ↑Tue May 17, 2022 5:53 pm i wish someone would flash it for me. This modern witchcraft is not my thing. DIL components and GALs are the highest for me ...
I think it's a good idea to try the latest beta firmware, but I'd be surprised if that fixed it for you.
You really need to be able to flash it yourself if we're to get it working with your particular board as, at this time, yours is the only board we have that manifests like this.
BW
DFB1 Open source 50MHz 030 and TT-RAM accelerator for the Falcon
DSTB1 Open source 16Mhz 68k and AltRAM accelerator for the ST
Smalliermouse ST-optimised USB mouse adapter based on SmallyMouse2
FrontBench The Frontier: Elite 2 intro as a benchmark
DSTB1 Open source 16Mhz 68k and AltRAM accelerator for the ST
Smalliermouse ST-optimised USB mouse adapter based on SmallyMouse2
FrontBench The Frontier: Elite 2 intro as a benchmark
- frank.lukas
- Posts: 661
- Joined: Fri Jan 19, 2018 11:52 am
Re: Xilinx programming cable USB -- anyone got this one?
... the VREF cable had no connection to the USB dongle. The cable was broken, nobody can figure it out! The status LED is now also go green. XC3SPROG does not work with the XPC device. I need to use the Xilinx Software Suite.
I don't dare to go any further ...
I don't dare to go any further ...
Re: Xilinx programming cable USB -- anyone got this one?
Excellent news!frank.lukas wrote: ↑Wed May 25, 2022 6:29 pm ... the VREF cable had no connection to the USB dongle. The cable was broken, nobody can figure it out!
What is your USB VID/PID pair now?
Here are the three tested firmwares. Yours is the oldest. Maybe try the most recent one and work backwards?
https://github.com/dh219/DFB/tree/main/DFB1/JEDEC
Cheers,
BW.
DFB1 Open source 50MHz 030 and TT-RAM accelerator for the Falcon
DSTB1 Open source 16Mhz 68k and AltRAM accelerator for the ST
Smalliermouse ST-optimised USB mouse adapter based on SmallyMouse2
FrontBench The Frontier: Elite 2 intro as a benchmark
DSTB1 Open source 16Mhz 68k and AltRAM accelerator for the ST
Smalliermouse ST-optimised USB mouse adapter based on SmallyMouse2
FrontBench The Frontier: Elite 2 intro as a benchmark