Screws!

General discussions or ideas about hardware.
Post Reply
User avatar
francouai
Posts: 89
Joined: Tue Aug 22, 2017 1:45 pm
Location: PARIS

Screws!

Post by francouai » Sat Jan 13, 2018 8:54 pm

I need to find on internet, all kind of screws used for the atari ST and Falcon (same)
Any idea what are the models or references?
And where to buy them?

Thanks!
--
Francouai

mikro
Posts: 113
Joined: Mon Aug 28, 2017 11:22 pm

Re: Screws!

Post by mikro » Sat Jan 13, 2018 11:37 pm

I have this info saved from the Falcon service manual:

6 screws (50) in the upper shield
3 screws (80) in the front of the shield/printed circuit board assembly
4 screws (80) at corners of power supply
3 screws (150) in the round holes (floppy) + standoffs (130)
9 screws (80) holding the shield
4 screws (220) from the square holes (the upper ones?)
3 screws (240) from the round holes (the bottom ones?)

Unfortunately, the service manual doesn't assign each kind (50, 80, ...) to the exact screw type, only lists quantities, so I had to guess it by myself:

50: 6x screw pan head M3x8
80: 16x screw pan head M3*5 (I'm not sure why these are for the PSU, shouldn't that be the longer M3, 50?)
150: 3x screw pph 6-32 x 1"), philips pan head
220: 4x screw self tap M3*7L
240: 3x screw self tap pan HD 3*10, asi pan head M3 10mm

I'm not really an expert on screws (only screw ups :)), does that "x8", "*5", "x1"", "*7L", "*10" means height? And if so, why it's a mixture of inches, mms and god know what?

User avatar
francouai
Posts: 89
Joined: Tue Aug 22, 2017 1:45 pm
Location: PARIS

Re: Screws!

Post by francouai » Sun Jan 14, 2018 10:16 am

well.. thanks for this info.

I think I'll back a cheap ST locally here in France, some starts at 20euros without cables/mouse.
--
Francouai

Post Reply