BLITTER RE-CREATION THOUGHTS

Progress on our FPGA cores.
User avatar
exxos
Site Admin
Site Admin
Posts: 23498
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: BLITTER RE-CREATION THOUGHTS

Post by exxos »

So playing around with possible layouts , its far from fun :roll:

Pretty much everything is going to have to go "external" to the blitter header pins, as the routing "inside" the header pins will be hard going with such small gaps.

I guess as its a test board, its not going to matter much how it looks anyway. It would be nice to squash it down enough to fit in a normal STFM, as that will be where its tested.. and as blitters are hard to find now...

Ultimately the core needs testing out fully by a few people, it helps the STF project and helps Wolfgang with more testing on his code cores...

blit.jpg
blit.jpg (48.81 KiB) Viewed 5372 times
b2.jpg
b2.jpg (48.2 KiB) Viewed 5371 times
b3.jpg
b3.jpg (50.84 KiB) Viewed 5370 times
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
User avatar
PhilC
Moderator
Moderator
Posts: 6016
Joined: Fri Mar 23, 2018 8:22 pm

Re: BLITTER RE-CREATION THOUGHTS

Post by PhilC »

I'm willing to bet you've already thought of these two suggestions but:

How about putting the chips on either side of a multi layer board?
or stacking one pub on top of another, sandwich style if you get my meaning?
If it ain't broke, test it to Destruction.
User avatar
exxos
Site Admin
Site Admin
Posts: 23498
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: BLITTER RE-CREATION THOUGHTS

Post by exxos »

Forgottenmyname wrote: Fri Sep 07, 2018 4:34 pm How about putting the chips on either side of a multi layer board?
It is something I am considering, I was mostly trying to get all the SMT on one side, its assembling double sided boards its pretty tricky :-\
Forgottenmyname wrote: Fri Sep 07, 2018 4:34 pm or stacking one pub on top of another, sandwich style if you get my meaning?
I know what you mean yes, what puts me off is it would need more header pins, ideally smaller pins which already shown on the image, but these are the tiny to solder by hand.. I could use larger pins, but is making the whole thing larger again..

In terms of size, probably the double sided board would probably be best option overall I think... That's assuming it is physically possible to route it.. I guess worst-case is a four layer board...

I think it does makes sense though...

bbb.jpg
bbb.jpg (57.31 KiB) Viewed 5367 times
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
User avatar
PhilC
Moderator
Moderator
Posts: 6016
Joined: Fri Mar 23, 2018 8:22 pm

Re: BLITTER RE-CREATION THOUGHTS

Post by PhilC »

Going to be interesting to route that, with all those narrow pins in close proximity. Might have a better chance with the small chips rotated 90 degrees. I take it the smaller chips aren't available as DIPs? would take more room but more room for routing and the possibility of putting sockets over header pins etc.
If it ain't broke, test it to Destruction.
User avatar
exxos
Site Admin
Site Admin
Posts: 23498
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: BLITTER RE-CREATION THOUGHTS

Post by exxos »

Once I finished doing some naming on the pins, I'm going to try routing it.., at first glance I think be possible on two layers I don't know until I try...
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
User avatar
exxos
Site Admin
Site Admin
Posts: 23498
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: BLITTER RE-CREATION THOUGHTS

Post by exxos »

Looks like it will route...

Buffers on top layer, PLD on bottom, it should route direct from buffers to PLD without to much messing about...

999.jpg
999.jpg (70.57 KiB) Viewed 5340 times
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
User avatar
Cyprian
Posts: 387
Joined: Fri Dec 22, 2017 9:16 am
Location: Poland

Re: BLITTER RE-CREATION THOUGHTS

Post by Cyprian »

exxos wrote: Fri Sep 07, 2018 4:26 pmUltimately the core needs testing out fully by a few people, it helps the STF project and helps Wolfgang with more testing on his code cores...
you can count on me...
how much for such a fpga blitter?
Lynx I / Mega ST 1 / 7800 / Portfolio / Lynx II / Jaguar / TT030 / Mega STe / 800 XL / 1040 STe / Falcon030 / 65 XE / 520 STm / SM124 / SC1435
DDD HDD / AT Speed C16 / TF536 / SDrive / PAK68/3 / Lynx Multi Card / LDW Super 2000 / XCA12 / SkunkBoard / CosmosEx / SatanDisk / UltraSatan / USB Floppy Drive Emulator / Eiffel / SIO2PC / Crazy Dots / PAM Net
http://260ste.atari.org
User avatar
exxos
Site Admin
Site Admin
Posts: 23498
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: BLITTER RE-CREATION THOUGHTS

Post by exxos »

Cyprian wrote: Fri Sep 07, 2018 7:47 pm how much for such a fpga blitter?
Not sure yet.. The blitters I was selling before were a silly £28 due to high costs in obtaining the things, I don't expect the cost to be more than that.. but could be close.

With such a coded core.. it is of course possible to add functions.. not sure what, that's up to the coders to think up what might be possible/useful..
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
User avatar
exxos
Site Admin
Site Admin
Posts: 23498
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: BLITTER RE-CREATION THOUGHTS

Post by exxos »

OCD issues...

11111111.jpg
11111111.jpg (105.18 KiB) Viewed 5329 times
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
User avatar
exxos
Site Admin
Site Admin
Posts: 23498
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: BLITTER RE-CREATION THOUGHTS

Post by exxos »

Is it me or the vodka....

.. and why do I want to put a smiley face in the middle...

2222222222.jpg
2222222222.jpg (87.06 KiB) Viewed 5328 times
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
Post Reply

Return to “FPGA DEVELOPMENT”