Line Audio Design Jam IN 8 and Jam IN 2 for Atari Falcon 030

All information is slowing being ported from AMN over to this section for preservation.
Post Reply
User avatar
Site Admin
Site Admin
Posts: 7873
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK

Line Audio Design Jam IN 8 and Jam IN 2 for Atari Falcon 030

Post by exxos » Thu Dec 21, 2017 7:23 pm

Atari-Falcon-Line-Audio-Design-Jam-In-8.jpg (18.04 KiB) Viewed 977 times
The Line Audio Design Jam In 8/2 for Atari Falcon 030: product information courtesy of Line Audio Designs
The Jam IN 8/2 has the same audio quality to match the Jam 8/2: low noise,
low distortion and totally flat frequency response. It features professional 1/4 "balanced input Jack sockets on each channels using 1-bit delta sigma A/D converters at 18-bit resolution and x128 oversampling.

The Jam IN 8/2 includues a double DSP plug for optional connection of SPDIF iinterfaces.


Frequency response: 10Hz-22KH z±0.1dB,49kHz
Bit rate: 1-bit delta sigma A/D converters, 18-bit resolution, x128 oversampling
Signal to noise: >90dB A-weighted
Harmonic distortion: 0.005%
Input sensitivity: 1.25 V RMS
Size: 129 x47 x134mm
4MB STFM 1.44 FD- VELOCE+ 020 STE - 4MB STE 32MHz - STFM 16MHz - STM - MEGA ST - Falcon 030 CT60 - Atari 2600 - Atari 7800 - Gigafile - SD Floppy Emulator - PeST - HxC - CosmosEx - Ultrasatan - various clutter All my hardware guides - mods - games - STOS - All my hardware mods for sale - Please help support by making a purchase.

Post Reply