So been trying to remove a shorted between 2 pins, only to realise they are actually linked on the PCB!
I am mentioning it here as its something I keep forgetting about and could catch out others. Moral of the story is to never link pins directly together like that. Always route them away from the chip a bit. That way, you don't get the appearance of a solder short, when pins are actually connected.
When pins look shorted but are not
When pins look shorted but are not
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
- rubber_jonnie
- Site Admin
- Posts: 10600
- Joined: Thu Aug 17, 2017 7:40 pm
- Location: Essex
- Contact:
Re: When pins look shorted but are not
Hmm, interesting.
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
- TheNameOfTheGame
- Posts: 164
- Joined: Tue Dec 05, 2017 5:49 pm
- Location: Almost Heaven, West Virginia
Re: When pins look shorted but are not
Yeah, that's definitely not a best practice lol. I agree, bring them out and connect with traces that are obvious.