New magnifier

Tool suggestions, soldering tips, general useful electronics knowhow.
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 10623
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:

Re: New magnifier

Post by rubber_jonnie »

PaulJ_2.0 wrote: Tue Aug 18, 2020 9:04 am How about using a cheap microphone boom that clamps to a desk/shelf(ideally to minimise shaking)?

Something like this would be articulated enough move where youd need it on any desk:

https://tinyurl.com/ikklescope
I've ordered one of these, they seem relatively small, so for £10.99 it's all good. Will report back when it arrives.
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 10623
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:

Re: New magnifier

Post by rubber_jonnie »

That mic holder is perfect! (Unlike my photography!)
IMG_20200820_125738.jpg
IMG_20200820_125738.jpg (304.65 KiB) Viewed 2962 times
:girldance: :girldance: :girldance:
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
User avatar
Smonson
Posts: 710
Joined: Sat Oct 28, 2017 10:21 am
Location: Canberra, Australia
Contact:

Re: New magnifier

Post by Smonson »

That is excellent. I think you've just invented a must-have electronics tool.
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 10623
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:

Re: New magnifier

Post by rubber_jonnie »

Smonson wrote: Thu Aug 20, 2020 2:28 pm That is excellent. I think you've just invented a must-have electronics tool.
To be fair @PaulJ_2.0 deserves the credit for the microphone holder suggestion, but my microscope was made for it, slotted right in :)
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
PaulJ_2.0
Posts: 571
Joined: Sat May 11, 2019 11:32 pm

Re: New magnifier

Post by PaulJ_2.0 »

Great stuff! Love a simple solution :)
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 10623
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:

Re: New magnifier

Post by rubber_jonnie »

PaulJ_2.0 wrote: Thu Aug 20, 2020 6:56 pm Great stuff! Love a simple solution :)
Was a good call on your part. It needs a slight tweak to the mic holder but overall for £10.99 I can't complain 😁
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
User avatar
Icky
Site Admin
Site Admin
Posts: 3994
Joined: Sun Sep 03, 2017 10:57 am
Location: UK

Re: New magnifier

Post by Icky »

I have one of these magnifiers but sometimes I need to revert to pure optics.

Have had a short on one of my boards for the past week and pouring all over the board with the magnifier and for the life of me I have not been able to find the cause of the short.

Reverting to a pair of watch repair lenses I managed to find the issue. The short was buried behind the FPGA pins tight up against the FPGA package.

I swear by these as a backup to the magnifier even if I do look ridiculous in them :)

Aeberbach
Posts: 150
Joined: Mon Dec 16, 2019 10:24 pm

Re: New magnifier

Post by Aeberbach »

Also look at IKEA - they have a cheap desktop lamp with an arm that may be even cheaper than the microphone stand.
Post Reply

Return to “ELECTRONICS”