CA4003290 - STE

STE motherboards
Post Reply
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 10467
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:

CA4003290 - STE

Post by rubber_jonnie »

Here is the CA4003290 I just received:
IMG_20180105_114439__01.jpg
IMG_20180105_114439__01.jpg (5.2 MiB) Viewed 5591 times
Unknown if it works, but worth a punt, as I have all of the other components standing by.

Floppy controller is WDC1772 (Ajax would have been nice), DMA is 001A.

That being said, I don't believe the bad DMA myth, I just believe the ST ranges were built to a low price with the cheapest support components, leading to varied DMA performance depending on which chip was fitted and what day it came out of the factory!! :foldarms:

EDIT: 06/01/2018. The board runs fine, and has now formed the basis of my second 4160STE. At some point it will be Gotek'd, get dual TOS and maybe will get an Ultrasatan. It does need some TLC though, as one of the SIMM sockets has damaged retainers, though it does seem to run fine without.
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
troed
Moderator
Moderator
Posts: 908
Joined: Mon Aug 21, 2017 10:27 pm

Re: CA4003290 - STE

Post by troed »

The attachment DSC_0276.JPG is no longer available
DSC_0276.JPG
DSC_0276.JPG (2.71 MiB) Viewed 5404 times
troed
Moderator
Moderator
Posts: 908
Joined: Mon Aug 21, 2017 10:27 pm

Re: CA4003290 - STE

Post by troed »

DSC_0277.JPG
DSC_0277.JPG (2.45 MiB) Viewed 5403 times
Post Reply

Return to “STE”