TT 10mb STRAM 64mb TTRAM Storm ATI Mach64 with NVDI 1280x1024 256col

[Steve]

Using stock TT 16 Med as the benchmark comparison.

IMG_20180809_150911.jpg (3.15 MiB) Viewed 858 times

[stephen_usher]

What sort of RAM are you using in your Storm? Does it have fast page mode enabled?

[Steve]

Ah yes sorry, forgot to say. I am using Kingston ram with FPM and EDO burst enabled.

[Icky]

Snap:

Same config but with 256MB Ram and FPU overclock

Question - does your TT have the VME patch?

IMG_2964.JPG (5.36 MiB) Viewed 818 times

[Steve]

I spoke to Atarian Computing (josh) and he thinks mine has the vme patch done on the pcb in the factory. I implemented a fix where the factory oscillator mod was incorrect, following Josh's instructions, everything seems to work well.

[frank.lukas]

Atari Mega ST1 with 4MB ST Ram, 8Mhz Board Clock, PAK68/3 with 68030-50Mhz /68882-50Mhz -32kB L2 Cache, FRAK/2 with 64MB TT Fastram, Panther/2 with NE2000 ISA Ethernet card (MiNT Driver) and a ATI MACH32 2MB ISA Videocard.

To Speedup I looking for a MACH64 ISA Graphiccard and set up the Boardclock to 10,12 or 16Mhz ...

GB630PAK.gif (50.41 KiB) Viewed 799 times

[tuxie]

Would be great if we could compare two identical systems, one with VME patch and one without patch. I a sure that you can see the differences between the systems.

[Atarian Computing]

Would be great if we could compare two identical systems, one with VME patch and one without patch. I a sure that you can see the differences between the systems.

Ahem: http://www.atariancomputing.com/blog/tt ... keitfaster

[tuxie]

Great,
with the lightning you should play with the transferblock size using the setter, the value should be dividable by 8 -1

[Steve]

Great,
with the lightning you should play with the transferblock size using the setter, the value should be dividable by 8 -1

Tuxie, with the USB2LAN on Lighting I average around 50k/s FTP transfers inside Mint. Is this normal? I had a feeling that overhead from the graphics card on the VME bus could be saturating the bus, thus slowing the ethernet down. What do you think?