Page 1 of 1
TT 10mb STRAM 64mb TTRAM Storm ATI Mach64 with NVDI 1280x1024 256col
Posted: Thu Aug 09, 2018 6:39 am
by Steve
Using stock TT 16 Med as the benchmark comparison.
- IMG_20180809_150911.jpg (3.15 MiB) Viewed 7250 times
Re: TT 10mb STRAM 64mb TTRAM Storm ATI Mach64 with NVDI 1280x1024 256col
Posted: Thu Aug 09, 2018 8:17 am
by stephen_usher
What sort of RAM are you using in your Storm? Does it have fast page mode enabled?
Re: TT 10mb STRAM 64mb TTRAM Storm ATI Mach64 with NVDI 1280x1024 256col
Posted: Thu Aug 09, 2018 9:11 am
by Steve
Ah yes sorry, forgot to say. I am using Kingston ram with FPM and EDO burst enabled.
Re: TT 10mb STRAM 64mb TTRAM Storm ATI Mach64 with NVDI 1280x1024 256col
Posted: Sat Aug 11, 2018 12:36 am
by Icky
Snap:
Same config but with 256MB Ram and FPU overclock
Question - does your TT have the VME patch?
- IMG_2964.JPG (5.36 MiB) Viewed 7210 times
Re: TT 10mb STRAM 64mb TTRAM Storm ATI Mach64 with NVDI 1280x1024 256col
Posted: Sat Aug 11, 2018 3:46 am
by Steve
I spoke to Atarian Computing (josh) and he thinks mine has the vme patch done on the pcb in the factory. I implemented a fix where the factory oscillator mod was incorrect, following Josh's instructions, everything seems to work well.
Re: TT 10mb STRAM 64mb TTRAM Storm ATI Mach64 with NVDI 1280x1024 256col
Posted: Sat Aug 11, 2018 12:38 pm
by frank.lukas
Atari Mega ST1 with 4MB ST Ram, 8Mhz Board Clock, PAK68/3 with 68030-50Mhz /68882-50Mhz -32kB L2 Cache, FRAK/2 with 64MB TT Fastram, Panther/2 with NE2000 ISA Ethernet card (MiNT Driver) and a ATI MACH32 2MB ISA Videocard.
To Speedup I looking for a MACH64 ISA Graphiccard and set up the Boardclock to 10,12 or 16Mhz ...
- GB630PAK.gif (50.41 KiB) Viewed 7191 times