STFM PAK020 - 16MHz 32BIT ROM

[exxos]

pak020.jpg (297.92 KiB) Viewed 993 times

I-CACHE OFF (SET VIA JUMPER ON PCB)

pak0201.jpg (119.28 KiB) Viewed 993 times

I-CACHE ON

pak0202.jpg (113.02 KiB) Viewed 993 times

[rubber_jonnie]

Quick Q here, I presume the original 68K cpu is removed from the mainboard, and a socket put in it's place, or is the PAK soldered into where the 68K used to be?

[exxos]

Quick Q here, I presume the original 68K cpu is removed from the mainboard, and a socket put in it's place, or is the PAK soldered into where the 68K used to be?

I had to put it into a socket, simply because as the board is so large it would not seat down to the motherboard as the MMU is in the way.

[rubber_jonnie]

Quick Q here, I presume the original 68K cpu is removed from the mainboard, and a socket put in it's place, or is the PAK soldered into where the 68K used to be?

I had to put it into a socket, simply because as the board is so large it would not seat down to the motherboard as the MMU is in the way.

Cool thanks, much as I had planned too, hence why I ordered 2 sockets from you