Page 1 of 1

STFM PAK020 - 16MHz 32BIT ROM

Posted: Fri Jan 19, 2018 10:37 am
by exxos
pak020.jpg
pak020.jpg (297.92 KiB) Viewed 4610 times


I-CACHE OFF (SET VIA JUMPER ON PCB)
pak0201.jpg
pak0201.jpg (119.28 KiB) Viewed 4610 times

I-CACHE ON
pak0202.jpg
pak0202.jpg (113.02 KiB) Viewed 4610 times

Re: STFM PAK020 - 16MHz 32BIT ROM

Posted: Fri Feb 23, 2018 4:23 pm
by rubber_jonnie
Quick Q here, I presume the original 68K cpu is removed from the mainboard, and a socket put in it's place, or is the PAK soldered into where the 68K used to be?

Re: STFM PAK020 - 16MHz 32BIT ROM

Posted: Fri Feb 23, 2018 4:43 pm
by exxos
rubber_jonnie wrote: Fri Feb 23, 2018 4:23 pm Quick Q here, I presume the original 68K cpu is removed from the mainboard, and a socket put in it's place, or is the PAK soldered into where the 68K used to be?
I had to put it into a socket, simply because as the board is so large it would not seat down to the motherboard as the MMU is in the way.

Re: STFM PAK020 - 16MHz 32BIT ROM

Posted: Fri Feb 23, 2018 11:44 pm
by rubber_jonnie
exxos wrote: Fri Feb 23, 2018 4:43 pm
rubber_jonnie wrote: Fri Feb 23, 2018 4:23 pm Quick Q here, I presume the original 68K cpu is removed from the mainboard, and a socket put in it's place, or is the PAK soldered into where the 68K used to be?
I had to put it into a socket, simply because as the board is so large it would not seat down to the motherboard as the MMU is in the way.
Cool thanks, much as I had planned too, hence why I ordered 2 sockets from you :)