Page 1 of 1

CT60 96MHz (without NVDI)

Posted: Fri Jun 22, 2018 2:17 pm
by exxos
IMG_2853.JPG
IMG_2853.JPG (6.6 MiB) Viewed 717 times

GB6 hasn't had much testing with the CT60. Caches show some odd results.. So I am not sure if that is correctly working or not.

Though in cases of 030, I talked to DML a lot as with data caches enabled, results were slower, which is actually correct for 030.. So possible 060 datacache could behave the same.. In anycase, if any CT60 programmers out there maybe could verify the cache settings are correct...

Oddly CT60 seems to disabled the blitter :(


DATA CACHE ON - INSTRUCTION CACHE ON
DON_ION.jpg
DON_ION.jpg (99.44 KiB) Viewed 717 times

DATA CACHE ON - INSTRUCTION CACHE OFF
DON_IOFF.jpg
DON_IOFF.jpg (103.21 KiB) Viewed 717 times

DATA CACHE OFF - INSTRUCTION CACHE ON
DOFF_ION.jpg
DOFF_ION.jpg (100.67 KiB) Viewed 717 times

DATA CACHE OFF - INSTRUCTION CACHE OFF
DOFF_IOFF.jpg
DOFF_IOFF.jpg (99.6 KiB) Viewed 717 times