800xl power supply - how to open?

Any 8bit repairs, images, cool things, upgrades etc.
Post Reply
PeteW
Posts: 101
Joined: Wed Jul 25, 2018 8:09 pm

800xl power supply - how to open?

Post by PeteW » Sat Sep 12, 2020 2:33 pm

Got a power supply for my 800xl. It's an original Atari one but seems to put out 0v on all pins. I want to open the case up but there are no visible screws. I wondered if anyone had some insight into how to open it with minimal damage?

I suspect I'll replace the insides with a usb charger, but would like to keep the look of the original brick

Appreciate the help!
IMG_20200912_141958.jpg
IMG_20200912_141958.jpg (284.77 KiB) Viewed 650 times
IMG_20200912_141952.jpg
IMG_20200912_141952.jpg (263.64 KiB) Viewed 650 times

PeteW
Posts: 101
Joined: Wed Jul 25, 2018 8:09 pm

Re: 800xl power supply - how to open?

Post by PeteW » Sun Sep 13, 2020 4:43 pm

Ok I'll answer my own question in case it helps someone else. The PSU is potted (encased in resin), so the base of the casing has posts on it that are embedded in the resin.

I used a chisel to break those off from the inside and then by soaking the main PSU in boiling water several times and applying reasonable levels of brute force, was able to remove the resin block and hollow out the case.

There's now plenty of space to hide a usb charger and the connections to the original cables inside, so it will look original, even if the PSU itself is modern

User avatar
PhilC
Moderator
Moderator
Posts: 3632
Joined: Fri Mar 23, 2018 8:22 pm

Re: 800xl power supply - how to open?

Post by PhilC » Sun Sep 13, 2020 4:48 pm

Nicely done @PeteW , all tips welcome.
If it ain't broke, test it to Destruction.

Post Reply

Return to “8 BIT CORNER”