Page 1 of 1

C103088 Rev.2.A

Posted: Tue Jul 03, 2018 1:20 pm
by Marsupilami
20180701_180435.jpg
20180701_180435.jpg (211.24 KiB) Viewed 1202 times
20180701_183051.jpg
20180701_183051.jpg (162.29 KiB) Viewed 1202 times
20180701_183338.jpg
20180701_183338.jpg (278.57 KiB) Viewed 1202 times
20180701_183342.jpg
20180701_183342.jpg (183.83 KiB) Viewed 1202 times
20180701_184329.jpg
20180701_184329.jpg (317.25 KiB) Viewed 1202 times

Ram is a bit strange...I don't know how to upgrade it...

Re: C103088 Rev.2.A

Posted: Tue Jul 03, 2018 2:39 pm
by Petari
That's 1MB RAM with 1 bit chips. Both banks filled. So, for upgrade you need to remove 1 (then to 2.5 MB), or both - (4 MB) existing banks. That may be problem for sure. Possible to leave them in, just connect chip select, output enable lines to +5V . And adding expansion then. Will it be OK or not depends - even inactive chips pull some power and load lines. Or maybe just get an STE :D

Re: C103088 Rev.2.A

Posted: Tue Jul 03, 2018 3:08 pm
by Marsupilami
:lol: Yes you're right, i have a STE and a MegaST already but i like to do some improvment on theses good old Ataris...

Upgrading RAM will we hard indeed so i will let it "as is".

Here my main problem is to upgrade TOS (in French) to make it work with my ultrasatan+PPDrivers (it doesn't work on all my french STF with TOS 1.2) :(
I'm not sure a TOS upgrade will solve the problem anyway.

Re: C103088 Rev.2.A

Posted: Tue Sep 04, 2018 8:05 pm
by sandord
Just reposting a copy of the main board image here because OP posted a link to an external site, which are prone to going offline/break after time.

20180701_184329.jpg
20180701_184329.jpg (1.97 MiB) Viewed 1205 times

Re: C103088 Rev.2.A

Posted: Tue Sep 04, 2018 8:18 pm
by exxos
sandord wrote:
Tue Sep 04, 2018 8:05 pm
Just reposting a copy of the main board image here because OP posted a link to an external site, which are prone to going offline/break after time.
Thanks, I've uploaded all the images. We are actually talking about this type of "problem" in the moderator forum as well :)