ABOUT THE ST V2.2 BOOSTER

[exxos]

v22.jpg (103.36 KiB) Viewed 518 times

V22_result1000-min.png (101.25 KiB) Viewed 518 times

The next generation of 16MHz booster is the V2.2 version. Speed is marginally faster than the V1.5 booster as the ROM decoding is done on board. The V2 also holds TOS206 in addition to TOS104. As with the V1.5 booster you can switch between 8MHz speeds and 16MHz speeds.

NOTE - If you are installing this booster on a MEGA ST, then you will need the MEGA BUFFER BOARD ALSO.

The 4.7K & 10K bus resistors should also be changed for 2.2K resistors if the machine is unstable (applies to all ST/MEGA machines). See "THE 10K NIGHTMARE" on the home page below.


HOME PAGE
http://www.exxoshost.co.uk/atari/last/V ... /index.htm

STORE LINK BOOSTER
https://www.exxoshost.co.uk/atari/last/storenew/#0040

STORE LINK BUFFER
https://www.exxoshost.co.uk/atari/last/storenew/#0039


If you are looking for help with this booster, please open up a new topic in this section.