ABOUT THE ST V2.2 BOOSTER
Posted: Sun Aug 20, 2017 10:54 pm
- v22.jpg (103.36 KiB) Viewed 4975 times
- V22_result1000-min.png (101.25 KiB) Viewed 4975 times
The next generation of 16MHz booster is the V2.2 version. Speed is marginally faster than the V1.5 booster as the ROM decoding is done on board. The V2 also holds TOS206 in addition to TOS104. As with the V1.5 booster you can switch between 8MHz speeds and 16MHz speeds.
NOTE - If you are installing this booster on a MEGA ST, then you will need the MEGA BUFFER BOARD ALSO.
The 4.7K & 10K bus resistors should also be changed for 2.2K resistors if the machine is unstable (applies to all ST/MEGA machines). See "THE 10K NIGHTMARE" on the home page below.
HOME PAGE
http://www.exxosforum.co.uk/atari/last/V ... /index.htm
STORE LINK BOOSTER
https://www.exxosforum.co.uk/atari/store2/#0040
STORE LINK BUFFER
https://www.exxosforum.co.uk/atari/store2/#0039
If you are looking for help with this booster, please open up a new topic in this section.