Page 29 of 61

Re: V2.5 BOOSTER CURRENT PROTOTYPE STATUS (SEC BOOSTER)

Posted: Sat Jan 19, 2019 2:20 pm
by exxos
Forgottenmyname wrote: Sat Jan 19, 2019 11:23 am Is the Atmel programmer the same as for the atmega328 etc? As I have one of those somewhere
It needs to program the ATF15xx series..

Re: V2.5 BOOSTER CURRENT PROTOTYPE STATUS (SEC BOOSTER)

Posted: Sat Jan 19, 2019 2:35 pm
by PhilC
Ok, can you not do those with a tl866? They are just a gal equivalent right?

Re: V2.5 BOOSTER CURRENT PROTOTYPE STATUS (SEC BOOSTER)

Posted: Sat Jan 19, 2019 4:30 pm
by exxos
Forgottenmyname wrote: Sat Jan 19, 2019 2:35 pm Ok, can you not do those with a tl866? They are just a gal equivalent right?
These chips are like 100pin using JTAG. Totally different programming tech than gals. You have to use the correct jtag programmer by atmel.

Re: V2.5 BOOSTER CURRENT PROTOTYPE STATUS (SEC BOOSTER)

Posted: Sat Jan 19, 2019 4:45 pm
by PhilC
Ok, it's neither of the two i've got as i doubt the Kies one i got will.

Re: V2.5 BOOSTER CURRENT PROTOTYPE STATUS (SEC BOOSTER)

Posted: Sat Jan 19, 2019 5:24 pm
by PaulJ
A eetools chipmax2 will do them. It pretty much does anything...

Re: V2.5 BOOSTER CURRENT PROTOTYPE STATUS (SEC BOOSTER)

Posted: Sat Jan 19, 2019 5:38 pm
by rpineau
The chipmax2 doesn't .. it does the ATF16/20/22Vxx, ATV750/1500/2500 .. but not the ATF15xx which have their proprietary algo. They require a specific programmer , the ATDH1150USB (which as you can imagine only does these and nothing else).
The ATF15xx family : http://ww1.microchip.com/downloads/en/D ... erview.pdf

The ATDH1150USB :
https://www.microchipdirect.com/product/ATDH1150USB
https://www.digikey.com/product-detail/ ... ND/2050869
https://www.mouser.com/ProductDetail/Mi ... UebQ%3D%3D
https://uk.farnell.com/microchip/atdh11 ... dp/2695292#

been there, done that ...

Re: V2.5 BOOSTER CURRENT PROTOTYPE STATUS (SEC BOOSTER)

Posted: Sat Jan 19, 2019 6:28 pm
by PhilC
thats a bit more affrordable, the other was like £424, instread of £50

Can stretch to one of those next month :D

Re: V2.5 BOOSTER CURRENT PROTOTYPE STATUS (SEC BOOSTER)

Posted: Sat Jan 19, 2019 6:34 pm
by PaulJ
rpineau wrote: Sat Jan 19, 2019 5:38 pm The chipmax2 doesn't .. it does the ATF16/20/22Vxx, ATV750/1500/2500 .. but not the ATF15xx which have their proprietary algo. They require a specific programmer , the ATDH1150USB (which as you can imagine only does these and nothing else).
The ATF15xx family : http://ww1.microchip.com/downloads/en/D ... erview.pdf

The ATDH1150USB :
https://www.microchipdirect.com/product/ATDH1150USB
https://www.digikey.com/product-detail/ ... ND/2050869
https://www.mouser.com/ProductDetail/Mi ... UebQ%3D%3D
https://uk.farnell.com/microchip/atdh11 ... dp/2695292#

been there, done that ...
I beg to differ.. see screen shot of selections. If its listed it programs the device. Never had one that was listed not work. Maybe you have old info or old software?. Not sure if I have the adaptor but that's secondary to the programmer being capable.
IMG_1140.JPG
IMG_1140.JPG (5 MiB) Viewed 3675 times
Excuse the crappy pic but I couldn't find the snipper on windoze and didn't want to waste any time on it. I use it as a hammer and only use it when absolutely necessary,,

Re: V2.5 BOOSTER CURRENT PROTOTYPE STATUS (SEC BOOSTER)

Posted: Sat Jan 19, 2019 9:33 pm
by exxos
How does the programmer interface to the ATF15xx series ? must have JTAG cable?, as inserting the SMT TQFN package be near impossible into the programmer..

Re: V2.5 BOOSTER CURRENT PROTOTYPE STATUS (SEC BOOSTER)

Posted: Sat Jan 19, 2019 10:20 pm
by PaulJ
There a column that lists adaptors, I have some but haven't checked the the adaptor specified. It also burns the cplds for bf's boards but I'm going to use the Raspberry so I can check them after soldering as his video shows.