Thanks to Forgottenmyname for sending me some printed parts and thanks to R_J for creating them - great work guys
Have fitted to board and they work. A couple of things that have helped and I also still need to do:
I tapped the pillars with thread tap so I could put in screws. The pillar by the MIDI ports needs sanding down slightly as the resistors get in the way of it swinging round into the correct place.
PSU Risers for STF Remake board
Re: PSU Risers for STF Remake board
That actually looks pretty good. Will have to print myself a set now too.
If it ain't broke, test it to Destruction.
Re: PSU Risers for STF Remake board
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
- rubber_jonnie
- Site Admin
- Posts: 10483
- Joined: Thu Aug 17, 2017 7:40 pm
- Location: Essex
- Contact:
Re: PSU Risers for STF Remake board
Glad to see they worked out well, and good to see them in use
I'll actually print myself a set as soon as my new roll of filament arrives.
I'll actually print myself a set as soon as my new roll of filament arrives.
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
Re: PSU Risers for STF Remake board
So if the top right post was lower down, would the other 3 holes then line up?
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
Re: PSU Risers for STF Remake board
Lower down and slightly to the right. However I think they are all out slightly as if you look at the pic here of the bottom of stand-offs.
The right one is slightly shorter in the hole off-set and the angle is ever so slightly different.
I take it you are asking so that you can sort out the holes on the H board? If so I think hardest part is getting these holes correct so that the socket and switch fit nicely when the board is put in an original case. Not an easy line up job.
Re: PSU Risers for STF Remake board
I've sorted the holes out already.. was just trying to work out if I actually even tried to align the holes up or not.. doesn't matter either way really.
I guess if would help if I had a blank motherboard to check it out with paper properly.
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.