Case for 520ST PSU remake

The place to discuss & share your 3D models or printable parts!
Post Reply
User avatar
rubber_jonnie
Moderator
Moderator
Posts: 1360
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:

Case for 520ST PSU remake

Post by rubber_jonnie » Sun Apr 14, 2019 11:58 am

Gcode files for 3d printing the remade PSU case. These are set to print faster, so quality may not be as high as you'd wish, if not change the layer thickness from .3 to something less in your prefferred software.
Attachments
PSU_Case.zip
(6.26 MiB) Downloaded 39 times
Collector of old Atari things:
800XL + Ape Warp mod, 2x 1010 cassette, 1050 + Happy mod, 65XE (128k) & XC12, SIO2SD, 2600jr, 7800 and Lynx II
Atari 520ST (1Meg) + Gotek, 1040STFM + Vortex ATOnce + Gotek, 1040STF long button floppy, 4160 STE with Gotek and ROM switcher, 4160STE with 32Mhz booster, ROM switcher and CosmosEx, not to mention various bare ST boards for testing including a PAK 68/2 :)
Plus the rest..
Amiga stuff, Mac stuff, Sinclair stuff etc...
www.electronicnothingness.co.uk

ctirad
Posts: 7
Joined: Sun Feb 24, 2019 5:59 pm

Re: Case for 520ST PSU remake

Post by ctirad » Thu Sep 26, 2019 12:33 pm

Thanks, but why do you distribute gcode instead of an stl?
I'd like to slice it for my printer and filament setup.

User avatar
rubber_jonnie
Moderator
Moderator
Posts: 1360
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:

Re: Case for 520ST PSU remake

Post by rubber_jonnie » Thu Sep 26, 2019 4:50 pm

ctirad wrote:
Thu Sep 26, 2019 12:33 pm
Thanks, but why do you distribute gcode instead of an stl?
I'd like to slice it for my printer and filament setup.
Sorry, that was an oops on my part, I uploaded the wrong ZIP file. New one is attached.

Can also be found on Thingiverse: https://www.thingiverse.com/thing:2701695
Attachments
PSU_Case.zip
(383.91 KiB) Downloaded 6 times
Collector of old Atari things:
800XL + Ape Warp mod, 2x 1010 cassette, 1050 + Happy mod, 65XE (128k) & XC12, SIO2SD, 2600jr, 7800 and Lynx II
Atari 520ST (1Meg) + Gotek, 1040STFM + Vortex ATOnce + Gotek, 1040STF long button floppy, 4160 STE with Gotek and ROM switcher, 4160STE with 32Mhz booster, ROM switcher and CosmosEx, not to mention various bare ST boards for testing including a PAK 68/2 :)
Plus the rest..
Amiga stuff, Mac stuff, Sinclair stuff etc...
www.electronicnothingness.co.uk

User avatar
rubber_jonnie
Moderator
Moderator
Posts: 1360
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:

Re: Case for 520ST PSU remake

Post by rubber_jonnie » Thu Sep 26, 2019 4:52 pm

Also, don't do what I did, and try to get the print time down by changing the layer height etc, it made my print finish faster, but I had a lot of problems with the top vents.
Collector of old Atari things:
800XL + Ape Warp mod, 2x 1010 cassette, 1050 + Happy mod, 65XE (128k) & XC12, SIO2SD, 2600jr, 7800 and Lynx II
Atari 520ST (1Meg) + Gotek, 1040STFM + Vortex ATOnce + Gotek, 1040STF long button floppy, 4160 STE with Gotek and ROM switcher, 4160STE with 32Mhz booster, ROM switcher and CosmosEx, not to mention various bare ST boards for testing including a PAK 68/2 :)
Plus the rest..
Amiga stuff, Mac stuff, Sinclair stuff etc...
www.electronicnothingness.co.uk

Post Reply

Return to “3D MODELS”