STFM case remake

The place to discuss & share your 3D models or printable parts!
User avatar
Icky
Moderator
Moderator
Posts: 2501
Joined: Sun Sep 03, 2017 10:57 am
Location: UK
YouTube: https://tinyurl.com/yals4a3k
Contact:

Re: STFM case remake

Post by Icky » Tue Sep 01, 2020 9:41 pm

troed wrote:
Tue Sep 01, 2020 9:31 pm
You're printing these with ABS?
@troed - currently these are ABS but have been playing with different material on the printer.

troed
Moderator
Moderator
Posts: 701
Joined: Mon Aug 21, 2017 10:27 pm

Re: STFM case remake

Post by troed » Tue Sep 01, 2020 11:28 pm

Icky wrote:
Tue Sep 01, 2020 9:41 pm
@troed - currently these are ABS but have been playing with different material on the printer.
That's really impressive - I would expect extremely problematic warping at those sizes with ABS!

User avatar
rpineau
Site Admin
Site Admin
Posts: 527
Joined: Thu Aug 17, 2017 6:08 pm
Location: USA
Contact:

Re: STFM case remake

Post by rpineau » Wed Sep 02, 2020 4:04 am

dhedberg wrote:
Tue Sep 01, 2020 5:45 pm
It's so... so... pink!
There .. you can fix it with this : https://retrohax.net/shop/atari/spray-p ... e-st-grey/
:D :cheers:
Working ones : MegaSTE (68020) / TT030 / Falcon with AB040 & Eclipse / 1040STF
Need testing : Falcon with CT2

User avatar
Cosmic Puppet
Trusted Guru
Trusted Guru
Posts: 649
Joined: Fri Aug 02, 2019 1:03 am
Location: West Yorkshire
YouTube: https://www.youtube.com/channel/UCbuSMn ... MoHknHryLg
Contact:

Re: STFM case remake

Post by Cosmic Puppet » Wed Sep 02, 2020 4:14 pm

Atari Barbie. :lol:
US Atari 520 STFM (C070523-001 REV.D1) 4MB Marpet Upgrade, TOS 1.04, EmuTOS 1.0, Ultrasatan, PP Driver, Original Floppy Disk Drive, NEC Multisync EA193Mi Monitor.

User avatar
exxos
Site Admin
Site Admin
Posts: 12285
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
YouTube: https://www.youtube.com/user/exxosuk
Contact:

Re: STFM case remake

Post by exxos » Wed Sep 02, 2020 4:18 pm

Y'all only jealous ... :lol:
https://www.exxoshost.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxoshost.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.

User avatar
Cosmic Puppet
Trusted Guru
Trusted Guru
Posts: 649
Joined: Fri Aug 02, 2019 1:03 am
Location: West Yorkshire
YouTube: https://www.youtube.com/channel/UCbuSMn ... MoHknHryLg
Contact:

Re: STFM case remake

Post by Cosmic Puppet » Wed Sep 02, 2020 5:40 pm

exxos wrote:
Wed Sep 02, 2020 4:18 pm
Y'all only jealous ... :lol:
:lol:
US Atari 520 STFM (C070523-001 REV.D1) 4MB Marpet Upgrade, TOS 1.04, EmuTOS 1.0, Ultrasatan, PP Driver, Original Floppy Disk Drive, NEC Multisync EA193Mi Monitor.

WDB
Posts: 10
Joined: Sat Aug 22, 2020 4:30 pm

Re: STFM case remake

Post by WDB » Sun Sep 13, 2020 7:23 pm

Awesome project, my experience with printing ABS was never very good. I tried some ABS+ that is supposed have less shrinkage and was able to get a decent print every once and awhile. I need a heated chamber.

User avatar
Icky
Moderator
Moderator
Posts: 2501
Joined: Sun Sep 03, 2017 10:57 am
Location: UK
YouTube: https://tinyurl.com/yals4a3k
Contact:

Re: STFM case remake

Post by Icky » Tue Sep 15, 2020 4:35 pm

WDB wrote:
Sun Sep 13, 2020 7:23 pm
Awesome project, my experience with printing ABS was never very good. I tried some ABS+ that is supposed have less shrinkage and was able to get a decent print every once and awhile. I need a heated chamber.
Yes it was printed with ABS+. I do see improvements with the + version for shrinkage. The printer has a heated chamber and cools down gradually after the print has finished.

I have been playing around with ePA-CF (carbon fibre nylon) as well. I must admit I am not to impressed with it. It can be very brittle.

User avatar
sandord
Trusted Guru
Trusted Guru
Posts: 646
Joined: Mon Aug 13, 2018 10:08 pm
Location: The Netherlands
Contact:

Re: STFM case remake

Post by sandord » Sun Sep 20, 2020 9:55 am

dhedberg wrote:
Tue Sep 01, 2020 5:45 pm
It's so... so... pink!
And then there's always someone outdoing it.

Untitled.png
Untitled.png (3.17 MiB) Viewed 945 times

User avatar
exxos
Site Admin
Site Admin
Posts: 12285
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
YouTube: https://www.youtube.com/user/exxosuk
Contact:

Re: STFM case remake

Post by exxos » Sun Sep 27, 2020 12:59 pm

@Icky I think its a great idea to have this removable. It can fit any case such as STE, STFM, Falcon etc, Plus it mean was can custom the case for future remake boards as well :thumbup:

Screenshot 2020-08-10 at 20.31.31.png
Screenshot 2020-08-10 at 20.31.31.png (232.35 KiB) Viewed 822 times
https://www.exxoshost.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxoshost.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.

Post Reply

Return to “3D MODELS”