STF Remake Case ideas etc

The place to discuss & share your 3D models or printable parts!
Post Reply
User avatar
PhilC
Moderator
Moderator
Posts: 5984
Joined: Fri Mar 23, 2018 8:22 pm

STF Remake Case ideas etc

Post by PhilC »

Evening All,

So todays little job is to make a backplane for the STF, so that I can 3d print it once it's complete.

The case is going to be half 3d printed and half acrylic sheet.

Here's the progress so far.
Screenshot 2018-12-10 at 22.00.44.png
Screenshot 2018-12-10 at 22.00.44.png (247.76 KiB) Viewed 3715 times
Yesterday I'd been working on the keyboard for the STF, the idea is to have a wired keyboard a bit about the Mega ST one. Quick photo below, again will 3d print this and use acrylic sheet, just getting the ideas together first.
Screenshot 2018-12-10 at 22.05.19.png
Screenshot 2018-12-10 at 22.05.19.png (342.16 KiB) Viewed 3715 times
If it ain't broke, test it to Destruction.
User avatar
exxos
Site Admin
Site Admin
Posts: 23437
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: STF Remake Case ideas etc

Post by exxos »

:bravo:
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
User avatar
viking272
Posts: 130
Joined: Mon Aug 10, 2020 11:32 am
Location: Reading, Berkshire, UK

Re: STF Remake Case ideas etc

Post by viking272 »

Hi PhilC,

Did you get this printed OK?
I'm interested in the measurements for the ST series for the backplane.

Just wondering if they're all the same (bar the modulator addition)?
Did you have the old one to make your design from?
Post Reply

Return to “3D MODELS”