I am going to give Exxos an exclusive on this one , if you want to know about my new 3D printed design for the Ultra Satan case for RetroFun Boards, I will post it here instead of Facebook. And Yes Exxos I have no problem designing 3D printed stuff for your projects too. Here is the Thinkiverse link:
https://www.thingiverse.com/thing:3374756
Design just finished, gonna print another one tomorrow morning, unless someone wants to print one tonight, and let me know how it turns out, I have to go to the local library to 3D print, but its all free. Russ
Exxos: I don't know if this is in the right area, there may be an area more suited for it.
UltraSatan Case for RetroFun Boards Second Draft
Re: UltraSatan Case for RetroFun Boards Second Draft
I've moved it into the 3D section.
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
- rubber_jonnie
- Site Admin
- Posts: 10640
- Joined: Thu Aug 17, 2017 7:40 pm
- Location: Essex
- Contact:
Re: UltraSatan Case for RetroFun Boards Second Draft
Nice one.rcamp48 wrote: ↑Tue Jan 22, 2019 11:29 pm I am going to give Exxos an exclusive on this one , if you want to know about my new 3D printed design for the Ultra Satan case for RetroFun Boards, I will post it here instead of Facebook. And Yes Exxos I have no problem designing 3D printed stuff for your projects too. Here is the Thinkiverse link:
https://www.thingiverse.com/thing:3374756
Design just finished, gonna print another one tomorrow morning, unless someone wants to print one tonight, and let me know how it turns out, I have to go to the local library to 3D print, but its all free. Russ
Exxos: I don't know if this is in the right area, there may be an area more suited for it.
Might I suggest that for your next iteration you reduce the wall thickness on the sides slightly? It will reduce print time, and since it doesn't need to be load bearing, the thickness isn't so important. You might be able to reduce the height a bit too.
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
Re: UltraSatan Case for RetroFun Boards Second Draft
This is my fourth draft, with holes in the standoffs, different colors , etc
https://www.thingiverse.com/thing:3375565
Will be printing it this morning to see if it fits. Russ
https://www.thingiverse.com/thing:3375565
Will be printing it this morning to see if it fits. Russ