Case for 520ST PSU remake

The place to discuss & share your 3D models or printable parts!
Post Reply
User avatar
rubber_jonnie
Moderator
Moderator
Posts: 1320
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:

Case for 520ST PSU remake

Post by rubber_jonnie » Sun Apr 14, 2019 11:58 am

Gcode files for 3d printing the remade PSU case. These are set to print faster, so quality may not be as high as you'd wish, if not change the layer thickness from .3 to something less in your prefferred software.
Attachments
PSU_Case.zip
(6.26 MiB) Downloaded 23 times
Collector of old Atari things:
800XL + Ape Warp mod, 2x 1010 cassette, 1050 + Happy mod, 65XE (128k) & XC12, SIO2SD, 2600jr, 7800 and Lynx II
Atari 520ST (1Meg) + Gotek, 1040STFM + Vortex ATOnce + Gotek, 1040STF long button floppy, 4160 STE with Gotek and ROM switcher, 4160STE with 32Mhz booster, ROM switcher and CosmosEx, not to mention various bare ST boards for testing including a PAK 68/2 :)
Plus the rest..
Amiga stuff, Mac stuff, Sinclair stuff etc...
www.electronicnothingness.co.uk

Post Reply