Case for 520ST PSU remake

The place to discuss & share your 3D models or printable parts!
Post Reply
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 10472
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:

Case for 520ST PSU remake

Post by rubber_jonnie »

Gcode files for 3d printing the remade PSU case. These are set to print faster, so quality may not be as high as you'd wish, if not change the layer thickness from .3 to something less in your prefferred software.
Attachments
PSU_Case.zip
(6.26 MiB) Downloaded 283 times
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
ctirad
Posts: 30
Joined: Sun Feb 24, 2019 5:59 pm

Re: Case for 520ST PSU remake

Post by ctirad »

Thanks, but why do you distribute gcode instead of an stl?
I'd like to slice it for my printer and filament setup.
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 10472
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:

Re: Case for 520ST PSU remake

Post by rubber_jonnie »

ctirad wrote: Thu Sep 26, 2019 12:33 pm Thanks, but why do you distribute gcode instead of an stl?
I'd like to slice it for my printer and filament setup.
Sorry, that was an oops on my part, I uploaded the wrong ZIP file. New one is attached.

Can also be found on Thingiverse: https://www.thingiverse.com/thing:2701695
Attachments
PSU_Case.zip
(383.91 KiB) Downloaded 218 times
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 10472
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:

Re: Case for 520ST PSU remake

Post by rubber_jonnie »

Also, don't do what I did, and try to get the print time down by changing the layer height etc, it made my print finish faster, but I had a lot of problems with the top vents.
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
Post Reply

Return to “3D MODELS”