Mega ST - Internal Ultrasatan Bracket (Lotharek)

The place to discuss & share your 3D models or printable parts!
Post Reply
User avatar
PhilC
Moderator
Moderator
Posts: 6016
Joined: Fri Mar 23, 2018 8:22 pm

Mega ST - Internal Ultrasatan Bracket (Lotharek)

Post by PhilC »

Here's my first attempt at an internal support / bracket that sits where the expansion port blank is.

This is for the Lotharek version of the board. Note, the mounting hole centres are slightly out but since I only needed the one of these I never fixed it.

I'll also adapt this next to take a compact flash to IDE adaptor when I get time.

Only other thing to say is that the support legs will need to be adjusted to length, depending on whether your shifter etc are socketed / fitted to a ram board or not.

Hopefully this link will work, LOL

https://a360.co/2Ph5XaX
Screenshot 2019-04-18 at 17.25.56.png
Screenshot 2019-04-18 at 17.25.56.png (315.36 KiB) Viewed 4497 times
If it ain't broke, test it to Destruction.
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 10472
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:

Re: Mega ST - Internal Ultrasatan Bracket (Lotharek)

Post by rubber_jonnie »

Nice

:bravo:
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
User avatar
Darklord
Posts: 900
Joined: Wed Sep 20, 2017 1:41 pm

Re: Mega ST - Internal Ultrasatan Bracket (Lotharek)

Post by Darklord »

Hmm, was this a personal effort or were you planning on selling them?

Thanks!
Welcome To DarkForce! www.darkforce.org "The Fuji Lives.!"
Atari SW/HW based BBS-Telnet:darkforce-bbs.dyndns.org 1040
User avatar
PhilC
Moderator
Moderator
Posts: 6016
Joined: Fri Mar 23, 2018 8:22 pm

Re: Mega ST - Internal Ultrasatan Bracket (Lotharek)

Post by PhilC »

No, just a personal effort but thought it might of use to others on the forum.
If it ain't broke, test it to Destruction.
User avatar
Darklord
Posts: 900
Joined: Wed Sep 20, 2017 1:41 pm

Re: Mega ST - Internal Ultrasatan Bracket (Lotharek)

Post by Darklord »

Okay, thanks.
Welcome To DarkForce! www.darkforce.org "The Fuji Lives.!"
Atari SW/HW based BBS-Telnet:darkforce-bbs.dyndns.org 1040
Post Reply

Return to “3D MODELS”