Mega ST - Internal Ultrasatan Bracket (Lotharek)
Posted: Thu Apr 18, 2019 5:32 pm
Here's my first attempt at an internal support / bracket that sits where the expansion port blank is.
This is for the Lotharek version of the board. Note, the mounting hole centres are slightly out but since I only needed the one of these I never fixed it.
I'll also adapt this next to take a compact flash to IDE adaptor when I get time.
Only other thing to say is that the support legs will need to be adjusted to length, depending on whether your shifter etc are socketed / fitted to a ram board or not.
Hopefully this link will work, LOL
https://a360.co/2Ph5XaX
This is for the Lotharek version of the board. Note, the mounting hole centres are slightly out but since I only needed the one of these I never fixed it.
I'll also adapt this next to take a compact flash to IDE adaptor when I get time.
Only other thing to say is that the support legs will need to be adjusted to length, depending on whether your shifter etc are socketed / fitted to a ram board or not.
Hopefully this link will work, LOL
https://a360.co/2Ph5XaX