Icky - Progress

Where Alpha builders can post pics and progress etc
Post Reply
User avatar
Icky
Trusted Guru
Trusted Guru
Posts: 816
Joined: Sun Sep 03, 2017 10:57 am
Location: UK

Icky - Progress

Post by Icky » Tue Sep 18, 2018 3:07 pm

IMG_3057.png
IMG_3057.png (445.75 KiB) Viewed 950 times
Here is the current status of my board so we can track progress of where each of us are:
  • Board built without blitter and using Exxos Ram Board with a 4MB SIMM installed.
  • Modifications installed so far viewtopic.php?f=19:
    • Jumper Pads - SJ1 - 5 all linked (soldered)
    • Reset Fix - R920 leg moved to be soldered to diode, tracks cut and patch wire in place
    • Hsync Fix - Pin 8 leg removed from U51 socket and Pin 8 and 9 on underside of board soldered together
  • Using the scope on the GLUE the board is producing 15.6kHz and 50Hz out. For the 50Hz it is initially 60Hz then immediately goes to 50Hz
  • On every switch on or reset I get a full white screen that turns to black screen with white border. Sometimes it stays solid but more than often it starts scrolling horizontally.
This evening I am hoping to do a lot of scoping to see what else is going on

User avatar
exxos
Site Admin
Site Admin
Posts: 5039
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: Icky - Progress

Post by exxos » Tue Sep 18, 2018 3:21 pm

I would first double check continuity on the ROM socket first of all.. socket problems are pretty common :(

Sounds like your getting some TOS init at least, it must be setting the palette to get a full white screen.. but never seen it go black after that..

Also please check BERR on the CPU...
4MB STFM 1.44 FD- VELOCE+ 020 STE - 4MB STE 32MHz - STFM 16MHz - STM - MEGA ST - Falcon 030 CT60 - Atari 2600 - Atari 7800 - Gigafile - SD Floppy Emulator - PeST - HxC - CosmosEx - Ultrasatan - various clutter

https://www.exxoshost.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxoshost.co.uk/atari/last/storenew/ - All my hardware mods for sale - Please help support by making a purchase.

User avatar
Icky
Trusted Guru
Trusted Guru
Posts: 816
Joined: Sun Sep 03, 2017 10:57 am
Location: UK

Re: Icky - Progress

Post by Icky » Tue Sep 18, 2018 5:22 pm

exxos wrote:
Tue Sep 18, 2018 3:21 pm
I would first double check continuity on the ROM socket first of all.. socket problems are pretty common :(

Sounds like your getting some TOS init at least, it must be setting the palette to get a full white screen.. but never seen it go black after that..

Also please check BERR on the CPU...
Checked continuity and socket is ok.

BERR on CPU goes high 5v at start and stays there

User avatar
exxos
Site Admin
Site Admin
Posts: 5039
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: Icky - Progress

Post by exxos » Tue Sep 18, 2018 5:33 pm

Icky wrote:
Tue Sep 18, 2018 5:22 pm
BERR on CPU goes high 5v at start and stays there
What about BG, BGACK, BR ? All those should stay high all the time...
4MB STFM 1.44 FD- VELOCE+ 020 STE - 4MB STE 32MHz - STFM 16MHz - STM - MEGA ST - Falcon 030 CT60 - Atari 2600 - Atari 7800 - Gigafile - SD Floppy Emulator - PeST - HxC - CosmosEx - Ultrasatan - various clutter

https://www.exxoshost.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxoshost.co.uk/atari/last/storenew/ - All my hardware mods for sale - Please help support by making a purchase.

User avatar
Icky
Trusted Guru
Trusted Guru
Posts: 816
Joined: Sun Sep 03, 2017 10:57 am
Location: UK

Re: Icky - Progress

Post by Icky » Tue Sep 18, 2018 6:00 pm

exxos wrote:
Tue Sep 18, 2018 5:33 pm
What about BG, BGACK, BR ? All those should stay high all the time...
BG and BGACK are high all the time but BR is low all the time

User avatar
exxos
Site Admin
Site Admin
Posts: 5039
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: Icky - Progress

Post by exxos » Tue Sep 18, 2018 6:02 pm

Icky wrote:
Tue Sep 18, 2018 6:00 pm
BG and BGACK are high all the time but BR is low all the time
hmmm, AFAIK nothing should be requesting the bus during startup (other than DMA stuff, blitter, ) Even so, CPU isn't granting the bus to anything either.. so that is odd...
4MB STFM 1.44 FD- VELOCE+ 020 STE - 4MB STE 32MHz - STFM 16MHz - STM - MEGA ST - Falcon 030 CT60 - Atari 2600 - Atari 7800 - Gigafile - SD Floppy Emulator - PeST - HxC - CosmosEx - Ultrasatan - various clutter

https://www.exxoshost.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxoshost.co.uk/atari/last/storenew/ - All my hardware mods for sale - Please help support by making a purchase.

User avatar
exxos
Site Admin
Site Admin
Posts: 5039
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: Icky - Progress

Post by exxos » Tue Sep 18, 2018 6:05 pm

hmmm.. I can't see a pull up on BR anywhere... so checking to see whats happened there...
4MB STFM 1.44 FD- VELOCE+ 020 STE - 4MB STE 32MHz - STFM 16MHz - STM - MEGA ST - Falcon 030 CT60 - Atari 2600 - Atari 7800 - Gigafile - SD Floppy Emulator - PeST - HxC - CosmosEx - Ultrasatan - various clutter

https://www.exxoshost.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxoshost.co.uk/atari/last/storenew/ - All my hardware mods for sale - Please help support by making a purchase.

User avatar
exxos
Site Admin
Site Admin
Posts: 5039
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: Icky - Progress

Post by exxos » Tue Sep 18, 2018 6:12 pm

OK.. "bodge wire 1" time...

bw1.jpg
bw1.jpg (278.2 KiB) Viewed 893 times
4MB STFM 1.44 FD- VELOCE+ 020 STE - 4MB STE 32MHz - STFM 16MHz - STM - MEGA ST - Falcon 030 CT60 - Atari 2600 - Atari 7800 - Gigafile - SD Floppy Emulator - PeST - HxC - CosmosEx - Ultrasatan - various clutter

https://www.exxoshost.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxoshost.co.uk/atari/last/storenew/ - All my hardware mods for sale - Please help support by making a purchase.

User avatar
Icky
Trusted Guru
Trusted Guru
Posts: 816
Joined: Sun Sep 03, 2017 10:57 am
Location: UK

Re: Icky - Progress

Post by Icky » Tue Sep 18, 2018 6:13 pm

exxos wrote:
Tue Sep 18, 2018 6:12 pm
OK.. "bodge wire 1" time...
OK - Lets give it a go

User avatar
exxos
Site Admin
Site Admin
Posts: 5039
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: Icky - Progress

Post by exxos » Tue Sep 18, 2018 6:18 pm

Icky wrote:
Tue Sep 18, 2018 6:13 pm
OK - Lets give it a go
Looks like BGACK hasn't a pull up either :roll: out of room on the RP's, so bodge resistor time...
4MB STFM 1.44 FD- VELOCE+ 020 STE - 4MB STE 32MHz - STFM 16MHz - STM - MEGA ST - Falcon 030 CT60 - Atari 2600 - Atari 7800 - Gigafile - SD Floppy Emulator - PeST - HxC - CosmosEx - Ultrasatan - various clutter

https://www.exxoshost.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxoshost.co.uk/atari/last/storenew/ - All my hardware mods for sale - Please help support by making a purchase.

Post Reply