Icky - Progress

[Icky]

Break the pins

Here goes.......

[Icky]

Break the pins

Here goes.......

pins just hanging by a thread.

With WD1772 data pins out and HDD connected it goes to desktop - thinks it is seeing 2 disks attached on TOS boot screen

Thought I would run the Hard Disk test from the DiagCart and I got this

Code: Select all

               Hard Disk DMA Exerciser
WARNING: abnormal termination may result in lost data.
Hit <Esc> key to stop program.
Q=quit, P=Park heads, S=start


Controller not responding

[exxos]

I never used that test in the cart.. So no idea..

Hard drive I think should auto boot to desktop if setup to do so on your stfm ? Main thing is if you can get a hard drive icon up on desktop... Obviously can't boot driver from floppy...

[Forgottenmyname]

Break the pins

Here goes.......

I can just see it now, rights sold to Warner brothers, Bruce Willis played Icky and Tom Cruise playing Exxos...

[tuxie]

Hi,

i had a similar issue as put my Pak onto my Mega ST.. if found the issue, the BG line was not connected correctly. So please check if the 3Wire Interace wires are connected correctly ?

[Icky]

Here goes.......

I can just see it now, rights sold to Warner brothers, Bruce Willis played Icky and Tom Cruise playing Exxos...

I can just see the trailer now

[Icky]

Hi,

i had a similar issue as put my Pak onto my Mega ST.. if found the issue, the BG line was not connected correctly. So please check if the 3Wire Interace wires are connected correctly ?

Thanks tuxie. I have been over and over the board more times than I can count checking lines etc.

I'm starting to dream pcb tracks in my sleep.

[Icky]

I never used that test in the cart.. So no idea..

Hard drive I think should auto boot to desktop if setup to do so on your stfm ? Main thing is if you can get a hard drive icon up on desktop... Obviously can't boot driver from floppy...

So HDD on an original ST drops to desktop with C drive icon.

HDD on STF Remake with data lines out on the WD1772 drops to desktop straight. Doesn't boot from HDD.

[exxos]

So HDD on an original ST drops to desktop with C drive icon.

HDD on STF Remake with data lines out on the WD1772 drops to desktop straight. Doesn't boot from HDD.

I don't suppose your STFM has the 1772 in a socket ? Wondering if you can simply remove the 1772 from a working machine and see if the HDD boots up still...

[Icky]

So HDD on an original ST drops to desktop with C drive icon.

HDD on STF Remake with data lines out on the WD1772 drops to desktop straight. Doesn't boot from HDD.

I don't suppose your STFM has the 1772 in a socket ? Wondering if you can simply remove the 1772 from a working machine and see if the HDD boots up still...

Now I did something similar but with the DMA. Was pondering and glanced at my STM 520 wall art and noticed the DMA was socketed.

I pulled it out and placed it into the STF Remake and put the WD1772 back to normal. I got drive C but there are more oddities.

Now its reversed Floppy isn't working when HDD is plugged in

IMG_3158.png (466.82 KiB) Viewed 114 times