16MHZ OPTIONAL FIX
Got the wire a little too hot here and melted back the insulation further than I'd like, but nothing risky is nearby, so it'll do.
(Yes, I did just cut that resistor off at the board instead of desolder it.)
derkom - Progress
Re: derkom - Progress
Quick question about the GLUE DATALINE FIX...
In step 1, it says, "Cut D0 & D1 tracks on the bottom of the PCB" and the red indicator covers two tracks in the picture:
Is it correct to cut both tracks covered by the red line, not just the yellow track? Since the instructions say to cut D0 and D1, and the non-yellow track goes to D0, I think I know the answer, but I want to double check with you guys before I cut.
In step 1, it says, "Cut D0 & D1 tracks on the bottom of the PCB" and the red indicator covers two tracks in the picture:
Is it correct to cut both tracks covered by the red line, not just the yellow track? Since the instructions say to cut D0 and D1, and the non-yellow track goes to D0, I think I know the answer, but I want to double check with you guys before I cut.
Re: derkom - Progress
Yes, cut both tracks
If you zoom the image, you can see D0 & D1 on the IC holes.
If you zoom the image, you can see D0 & D1 on the IC holes.
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
Re: derkom - Progress
Always a good plan!
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
Re: derkom - Progress
So, life got in the way and kept me away from this project for a long time. I've finally picked it up again and made some progress, although I'm not getting video (more on this later).
For now, various pullups and the GLUE dataline patch (don't ask about the bits in the corner):
For now, various pullups and the GLUE dataline patch (don't ask about the bits in the corner):
Re: derkom - Progress
MFP fix, keyboard resistor fix, ACIA dataline fix ...
Re: derkom - Progress
RAM RW fix ...
Re: derkom - Progress
1772 IRQ typo fix ...
Re: derkom - Progress
Floppy pullups fix ...