derkom - Progress

Where Alpha builders can post pics and progress etc
derkom
Posts: 25
Joined: Sun Jul 29, 2018 6:45 pm

Re: derkom - Progress

Post by derkom » Sat Oct 13, 2018 1:10 pm

16MHZ OPTIONAL FIX
bodge4.jpg
bodge4.jpg (169.44 KiB) Viewed 134 times

Got the wire a little too hot here and melted back the insulation further than I'd like, but nothing risky is nearby, so it'll do.

(Yes, I did just cut that resistor off at the board instead of desolder it.)

derkom
Posts: 25
Joined: Sun Jul 29, 2018 6:45 pm

Re: derkom - Progress

Post by derkom » Sun Oct 14, 2018 11:41 am

Quick question about the GLUE DATALINE FIX...

In step 1, it says, "Cut D0 & D1 tracks on the bottom of the PCB" and the red indicator covers two tracks in the picture:
cc1.JPG
cc1.JPG (322.61 KiB) Viewed 111 times

Is it correct to cut both tracks covered by the red line, not just the yellow track? Since the instructions say to cut D0 and D1, and the non-yellow track goes to D0, I think I know the answer, but I want to double check with you guys before I cut. :?

User avatar
exxos
Site Admin
Site Admin
Posts: 4625
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: derkom - Progress

Post by exxos » Sun Oct 14, 2018 11:49 am

Yes, cut both tracks :)

If you zoom the image, you can see D0 & D1 on the IC holes.
4MB STFM 1.44 FD- VELOCE+ 020 STE - 4MB STE 32MHz - STFM 16MHz - STM - MEGA ST - Falcon 030 CT60 - Atari 2600 - Atari 7800 - Gigafile - SD Floppy Emulator - PeST - HxC - CosmosEx - Ultrasatan - various clutter

https://www.exxoshost.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxoshost.co.uk/atari/last/storenew/ - All my hardware mods for sale - Please help support by making a purchase.

derkom
Posts: 25
Joined: Sun Jul 29, 2018 6:45 pm

Re: derkom - Progress

Post by derkom » Sun Oct 14, 2018 11:51 am

exxos wrote:
Sun Oct 14, 2018 11:49 am
Yes, cut both tracks :)

If you zoom the image, you can see D0 & D1 on the IC holes.
Yep, I did see the labels. Just wanted to be ultra-sure before cutting. Thanks! :)

User avatar
exxos
Site Admin
Site Admin
Posts: 4625
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: derkom - Progress

Post by exxos » Sun Oct 14, 2018 11:55 am

derkom wrote:
Sun Oct 14, 2018 11:51 am
Just wanted to be ultra-sure before cutting. Thanks! :)
Always a good plan! :)
4MB STFM 1.44 FD- VELOCE+ 020 STE - 4MB STE 32MHz - STFM 16MHz - STM - MEGA ST - Falcon 030 CT60 - Atari 2600 - Atari 7800 - Gigafile - SD Floppy Emulator - PeST - HxC - CosmosEx - Ultrasatan - various clutter

https://www.exxoshost.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxoshost.co.uk/atari/last/storenew/ - All my hardware mods for sale - Please help support by making a purchase.

Post Reply