Hi all,
I have an A500+ with a Rev 8A.1 Motherboard, and have taken my time ( too much ) fixing battery damage, The CAP C12 didn't make it, and I can't remember what it ism looking at amigapcb.org shows as a 10uF , now can I use a standard ceramic cap, or does it need to be "mlcc" ??
Also need to find a supplier of 74LS244 as managed to order some ages ago and they are now lost in the depths of my cave !
I have re-capped it, is there anything else I should replace while I'm in there ?
Thanks
Simon
A500+ Rev 8A.1
Moderators: terriblefire, Terriblefire Moderator
Re: A500+ Rev 8A.1
Hi,
Looking good.
Cap C12 = 10nF (nanofarad) and is the same as C10.
But you should be good to post it with out c12.
Looking good.
Cap C12 = 10nF (nanofarad) and is the same as C10.
But you should be good to post it with out c12.