Getting WFI Working on TF3xx with ESP Module

Help & news on accelerators from TF, Amiga, Atari, CD32 etc

Moderators: terriblefire, Terriblefire Moderator

terriblefire
Moderator Team
Moderator Team
Posts: 2834
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK
Contact:

Re: Drivers for ESP modules

Post by terriblefire » Tue Mar 31, 2020 11:19 am

theq wrote:
Tue Mar 31, 2020 11:16 am
Was testing this yesterday, but with no success. Need to confirm that my ESP-01S is working properly. Will test this today.
Just ordered stuff from Digikey to help troubleshoot the port during Easter.

Does the port act like a normal serial Tx/Rx on the Amiga with the normal serial.device (except it's TTL obviously)? No need for any fancy wrapper or workaround?
Yup that should work. You'll need to flash it with esp_slip_router and set the baud rate
———
I get cranky when asked to repeat myself.

theq
Posts: 86
Joined: Tue Dec 18, 2018 7:16 pm
Location: North of the Wall

Re: Drivers for ESP modules

Post by theq » Tue Mar 31, 2020 11:45 am

terriblefire wrote:
Tue Mar 31, 2020 11:19 am
Yup that should work. You'll need to flash it with esp_slip_router and set the baud rate
Yeah, flashed it with the default .bin's and with self-compiled .bin's but nothing.
Wasn't able to Putty it or make it connect to my wifi.

Will use my Raspberry Pi to troubleshoot it tonight. More reliant that way... :roll:

terriblefire
Moderator Team
Moderator Team
Posts: 2834
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK
Contact:

Re: Drivers for ESP modules

Post by terriblefire » Tue Mar 31, 2020 12:07 pm

theq wrote:
Tue Mar 31, 2020 11:45 am
terriblefire wrote:
Tue Mar 31, 2020 11:19 am
Yup that should work. You'll need to flash it with esp_slip_router and set the baud rate
Yeah, flashed it with the default .bin's and with self-compiled .bin's but nothing.
Wasn't able to Putty it or make it connect to my wifi.

Will use my Raspberry Pi to troubleshoot it tonight. More reliant that way... :roll:
You wont be able to putty. You need to SLAttach to it via linux and then telnet to port 7777 like the instructions say here.

https://github.com/martin-ger/esp_slip_router
———
I get cranky when asked to repeat myself.

matt020
Posts: 108
Joined: Sun Sep 29, 2019 9:17 am
Location: West Australia

Re: Drivers for ESP modules

Post by matt020 » Tue Mar 31, 2020 3:23 pm

terriblefire wrote:
Mon Mar 30, 2020 1:26 pm
a 3.3v usb serial breakout will work with the TF330.. but i'm not going down the road of supporting it etc. otherwise i'll get nothing done.
This might be easier, and at this stage the only working option. I'm not concerned if its at 19200 or 115000 baud, as long as there is a way to send files to/from the CD32, it would be more than what is running at the moment: no way of sending files to/from the CD32

I might start a new thread on it, if there is no objection.

terriblefire
Moderator Team
Moderator Team
Posts: 2834
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK
Contact:

Re: Drivers for ESP modules

Post by terriblefire » Tue Mar 31, 2020 3:28 pm

I tried following this guide and using WinUAE...

https://blog.nootch.net/post/amiga-bbs-online-2019/

I get this error...
error.JPG
error.JPG (50.74 KiB) Viewed 1635 times
Setup is here

https://mega.nz/#!cZREzILK!-0nAO4vUltxi ... zRBANsIcao
———
I get cranky when asked to repeat myself.

Smyckers
Posts: 7
Joined: Tue Aug 27, 2019 9:13 pm

Re: Drivers for ESP modules

Post by Smyckers » Tue Mar 31, 2020 5:24 pm

@terriblefire Can you try disabling "carrier detect" on the PPP tab of the interface in genesis Prefs?

terriblefire
Moderator Team
Moderator Team
Posts: 2834
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK
Contact:

Re: Drivers for ESP modules

Post by terriblefire » Tue Mar 31, 2020 5:32 pm

Smyckers wrote:
Tue Mar 31, 2020 5:24 pm
@terriblefire Can you try disabling "carrier detect" on the PPP tab of the interface in genesis Prefs?
That got it in fs-uae on macosx!
Screenshot 2020-03-31 at 17.31.34.png
Screenshot 2020-03-31 at 17.31.34.png (137.92 KiB) Viewed 1617 times
———
I get cranky when asked to repeat myself.

terriblefire
Moderator Team
Moderator Team
Posts: 2834
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK
Contact:

Re: Drivers for ESP modules

Post by terriblefire » Tue Mar 31, 2020 5:48 pm

So this hard disk set of file...

https://mega.nz/#!RJ4xkQSA!hKA6ZNLKkpfF ... tw1yhZF_LU

Plus the standard ESP SLIP ROUTER firmware

https://github.com/martin-ger/esp_slip_router

settings are

Code: Select all

ESP SLIP Router V1.1.0 (build: Sun Feb 23 23:34:52 2020)
SLIP: IP: 192.168.240.1 PeerIP: 192.168.240.2
STA: SSID: BTHub4-WXYZ PW: ******** [AutoConnect:1] 
External IP: 192.168.1.80
DNS server: 192.168.1.254
Clock speed: 160
Serial bit rate: 38400
———
I get cranky when asked to repeat myself.

theq
Posts: 86
Joined: Tue Dec 18, 2018 7:16 pm
Location: North of the Wall

Re: Drivers for ESP modules

Post by theq » Tue Mar 31, 2020 7:02 pm

I got mine working!
IMG_2661.jpg
IMG_2661.jpg (272.88 KiB) Viewed 1594 times
Default setting (as in the walkthrough) + it's running at 115200 :)
Only thing I know I changed is Modems/TAs setting: Device-tab: Ignore DSR.

Not gotten DNS* working yet, but getting there is easier now that I have the basics working.

Oh! I swapped my ESP-01S with a Adafruit ESP8266.

Edit: Got DNS working :D

terriblefire
Moderator Team
Moderator Team
Posts: 2834
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK
Contact:

Re: Drivers for ESP modules

Post by terriblefire » Tue Mar 31, 2020 7:31 pm

tried it in a TF330?

S
———
I get cranky when asked to repeat myself.

Post Reply

Return to “Terriblefire's channel”